Isprobajte naše lasere u akciji!
Laser engraver and cutter
Speedy series: Laser engraving and cutting machines for formats up to 1016 x 610 mm
| ⚫ Graviranje | ⚫ Sječenje | ⚫ Markiranje |
| Tip lasera: | CO₂, Fiber ili Flexx laser |
|---|---|
| Radna površina: | 610 x 305 do 1016 x 610 mm |
| Maks. visina predmeta: | 125 - 305 mm |
| Snaga lasera: | 10 - 120 W |
Large-format laser cutter
SP series: CO2 laser cutter for large-format materials.
| ⚫ Graviranje | ⚫ Sječenje | ⎯ Markiranje |
| Tip lasera: | CO₂ laser |
|---|---|
| Radna površina: | 1245 x 710 do 3250 x 3210 mm |
| Maks. visina predmeta: | 50 - 112 mm |
| Snaga lasera: | 40 - 400 W |
Industrial marking laser
Marking laser stations with galvo marking heads. Marking area up to 44.1 x 25.0 inch.
| ⚫ Graviranje | ⎯ Sječenje | ⚫ Markiranje |
| Tip lasera: | CO₂ ili Fiber laser |
|---|---|
| Maks. radno područje: | 190 x 190 do 1300 x 450 mm |
| Maks. visina predmeta: | 250 - 764 mm |
| Snaga lasera: | 20 - 100 W/20W MOPA |
Create a moveable globe as design element or fancy detail for other applications. Below are instructions and template download for your laser.
Preparation
Required material:
- 1/4 sheet of TroGlass Metallic in bright silver
Machine used:
- Speedy 360 flexx
- 100 Watt with 1.5" lens
- Vaccuum table with acrylic cutting grid
For this sample you only can use any laser machine from the Speedy laser engraver series.
Important:
- To keep the kerf as small as possible, we used the 1.5" lens instead of a 2" lens
- Material thickness can vary slightly. Therefore please measure the thickness and adapt the recess if necessary.
Korak po korak
Trotec Product recommendations
Step 1: Import design
Import our graphic. Add your design to the base plate or the outer ring.
Send the job to the laser using the settings below.
Print settings
| Process mode | Resolution | Cut line |
|---|---|---|
| Standard | 500 dpi | none |
| Halftone | Others |
|---|---|
| Color | Optimized geometries, inner geometries first |
Step 2: Laser process
Define the necessary parameters. They might vary depending on the machine used and the available laser power.
Laser Parameters
| Color | Process | Power (%) | Speed (%) | ppi/Hz |
|---|---|---|---|---|
| red | Cut CO2 | 40 | 0.2 | 5000 |
| Passes | Air Assist | Z-Offset | Advanced |
|---|---|---|---|
| 1 | on | - | - |
Info:
We used the standard parameters for TroGlass optimized for quality.
Step 3: Assembly
To assemble the globe, start with the ring that has four outside notches (1) and put it carefully into the ring with the two inner and two outer notches (2). Then put the ball into the ring that has two long connectors (3). Now put one of the two small rings (4) onto the outer ring (5). Then you insert the preassembled globe into the holder and fix it on the opposite side using the second ring (4). Finally, insert the globe into the stand (6).