Isprobajte naše lasere u akciji!
Laser engraver and cutter
Speedy series: Laser engraving and cutting machines for formats up to 1016 x 610 mm
| ⚫ Graviranje | ⚫ Sječenje | ⚫ Markiranje |
| Tip lasera: | CO₂, Flexx ili Fiber laser |
|---|---|
| Radna površina: | 610 x 305 do 1016 x 610 mm |
| Maks. visina predmeta: | 125 - 305 mm |
| Snaga lasera: | 20 - 120 W |
Large-format laser cutter
SP series: CO2 laser cutter for large-format materials.
| ⚫ Graviranje | ⚫ Sječenje | ⎯ Markiranje |
| Tip lasera: | CO₂ laser |
|---|---|
| Radna površina: | 1245 x 710 do 3250 x 3210 mm |
| Maks. visina predmeta: | 50 - 112 mm |
| Snaga lasera: | 40 - 400 W |
Industrial marking laser
Marking laser stations with galvo marking heads. Marking area up to 44.1 x 25.0 inch.
| ⚫ Graviranje | ⎯ Sječenje | ⚫ Markiranje |
| Tip lasera: | CO₂ ili Fiber laser |
|---|---|
| Maks. radno područje: | 190 x 190 do 1300 x 450 mm |
| Maks. visina predmeta: | 250 - 764 mm |
| Snaga lasera: | 20 - 100 W/20W MOPA |
Unsorted cutting lines can be a waste of time
When cutting and engraving graphics, the laser first carries out all engravings and then all cuts. Cutting is carried out in the order in which the outlines are drawn. However, this may lead to the external contour being cut first and the workpiece tilting, slipping or even falling through the cutting table. Cutting of the internal contours is then no longer possible.
How to order the parts of your laser job
Conventional methods for ordering cutting lines:
- Draw cutting lines in the exact order in which they are to be cut
- Sort cutting lines manually in the graphic before the data is sent to the laser
- Assign the cutting lines different colors in the Trotec material templates, which are then cut in the exact order as listed in the templates.
- The easiest and most convenient way to sort your cutting lines is the "Inner geometries first" feature in the JobControl® Software. It can be activated with only a mouseclick and will automatically sort your cutting lines.
Inner geometries first - featured in JobControl®
Activating this feature simplifies the working process many times over, because the cutting lines are automatically sorted and the internal cutting lines are cut first. This preset automatically improves the quality of your application, because internal parts remain firmly attached to the actual cut and thus cannot slip. The external contour is automatically cut at the end. In addition, this feature also saves time because the lines do not need to be manually sorted in the graphic.