Multifunctional Table Concept

Request a demo

The right working table for every application

The multifunctional table concept allows optimal configuration for all engraving and cutting applications. Depending on the application the ideal table can be selected and changed easily and quickly for highest processing quality and productivity.

For example, foils or paper require a vacuum table with high exhaust power levels in order to achieve optimum results. When cutting acrylics, however, as few contact points as possible are desirable, in order to avoid back reflections. In this case an acrylic cutting grid or acrylic slat cutting table would be suitable.


Aluminum Cutting Grid Table

This cutting table is the perfect solution for all general cutting tasks. It is suitable for a variety of cutting tasks with parts smaller than 100 mm, as these remain in a flat position after the cut. The table has more support points compared to the aluminum slat cutting table.

Aluminum Slat Cutting Table

This table is perfectly suited to laser cutting thicker materials (8 mm thickness) and for parts wider than 100 mm. Lamellas can be placed individually, consequently the table can be adjusted to each individual application.

Acrylic Cutting Grid Table

The special acrylic grid prevents back reflection. It is therefore ideal for cutting acrylics, laminates or plastic films with parts smaller than 100 mm, as these remain in a flat position after the cut.

Acrylic Slat Cutting Table

The cutting table with acrylic lamellas prevents reflection during cutting. This table is particularly used for cutting thicker materials (8 mm thickness) and for parts wider than 100 mm. The number of supporting points can be reduced by removing some of the lamellas individually, depending on the job.

Vacuum Table

The vacuum table fixes various materials to the working table using a light vacuum. This ensures correct focusing over the entire surface and as a consequence better engraving results are guaranteed. In addition it reduces the handling effort associated with mechanical mounting.
The vacuum table is the right table for thin and light weight materials, such as paper, foils and films, that generally do not lay flat on the surface.

Ferromagnetic table

The ferromagnetic construction allows to mount thin materials such as paper, films or foils with magnets to ensure an even and flat surface. An even working is essential for achieving optimal results for laser engraving and marking applications

Honeycomb Cutting Tabletop

The honeycomb table top is especially suitable for applications that require minimal back reflections and optimum flatness of the material, like for example the cutting of membrane switches. The honeycomb table top is recommended in use with a vacuum table.


Which work tables are available on which machine?

Work table Speedy 100 Speedy 
300
Speedy
360
Speedy
400
Ferromagnetic table
Aluminum Cutting Grid Table
Acrylic Cutting Grid Table ⚫* ⚫*
Aluminum Slat Cutting Table
Acryl Slat Cutting Table
Vacuum Table
Honeycomb Table Top

*available as tabletop version


Configure your laser machine with the following options for your application:

360° laser engraving using the rotary engraving attachment

With the Trotec rotary engraving attachment, you can quickly and easily engrave round, cylindrical and conical objects such as glasses, bottles, cups or vases of different sizes and diameters, thereby opening up new business sectors!

More about the rotary engraving attachment

The optimal lens for a perfect application result

Optimal results in laser engraving or laser cutting are achieved by using different lenses. As a rule of thumb, the following applies to the focus lenses: The more detailed the graphics, the shorter the focal length in laser engraving. And the thicker the material to be laser-cut, the greater the focal length should be. Apart from that, the laser power also plays an important role. For this reason, Trotec offers you eight different lenses for perfect results.

The right focus lens for your application

Engrave bulky parts with the pass-through

Full flexibility also means being able to work on workpieces that are larger than the machine. This is exactly what the Speedy Laser permits with its optional hatch. It allows the machining of very long and bulky workpieces such as doors, wall panels made of wood or large plates. Please note that the pass-through makes the Speedy a machine of laser safety class 4.

More about the pass-through