Trotec Laser International
Customer support
Phone: +6231-5465-068
E-Mail: indonesia@troteclaser.com
Contact form 
Laser engraved door mat
Step by step instructions
Request a demoCustomize conventional door mats with your Trotec laser and add extra value to this product quickly and easily.
Preparation
Required material:
- single-color door mat
Machine used:
- Speedy 400, 120 watts
- 4" lens
- Vacuum table
Depending on the size of the door mat, you can use any other machine of the Speedy laser engraver series.
Tip:
Due to the coarse structure of the door mat, we used a lens with long focal length to compensate the unevenness of the material.
Step by Step
Step 1: Import design
Make your own design or import our template.
Send the job to the laser using the driver settings below.
Print settings:
| Process mode | Resolution | Cut line |
|---|---|---|
| Standard | 333 dpi | none |
| Halftone | Others |
|---|---|
| Color | - |
Tip:
Since a door mat is typically viewed from the distance, you can use a lower resolution which reduces the production time.
Step 2: Engraving the door mat
Put the door mat into your Trotec laser. Make the parameter settings. The recommended settings can differ depending on the laser machine used and laser power available.
Laser parameters engraving:
| Color | Process | Power (%) | Speed (%) | ppi/Hz |
|---|---|---|---|---|
| black | Engrave CO2 | 80 | 100 | 500 |
| Passes | Air Assist | Z-Offset | Advanced |
|---|---|---|---|
| 1 | ON | 4mm | - |
Tip:
Since a door mat is typically viewed from the distance, a resolution of 333 dpi is sufficient.
Inspiration
- Engrave logos of companies, sports clubs or other organizations and extend your customer base.
- Slogans for private house builders or the first apartment are perfect for individual promotional items.
