Wrist watch

We show you how you can laser engrave and mark materials in one step.

engraved details wrist watch

Persiapan

Required material
  • Wristwatch with stainless steel case
  • Lego to position the items in the machine
Machine used
Product series

This sample can be produced with any machine from the flexx laser engraver series.

Langkah demi Langkah

trotec laser wrist watch
Langkah 1

Step 1: Design

Import our template or create your own design. Adapt the design so to the shape of the watch. Measure the height difference between the materials. This figure is required for the z-offset (for the watch we used there is no height difference between metal and leather). Why this step is so important and other helpful hints about how to use flexx technology is explained here.

Send the job to the laser using the following printer driver settings:

Process mode Resolution Cut line Halftone Others
Standard 1000 dpi none Color -

Tip:

It is easier to position/adjust the design, if you send the graphic elements for housing and wristband separately. By doing this you can position the graphics precisely with the help of the laser pointer.

laser marking metal wrist watch
Langkah 2

Step 2: Laser process

Make the parameter settings. The parameters can differ depending on the laser machine used and laser power available.

Important: When engraving a flexx job, always focus on the metal resp. on the material that shall be processed with the fiber laser.

Laser Parameters Annealing:

Color  Process Power (%) Speed (%) ppi/Hz
Black Engraving FLP 85 3 30000
Passes Air Assist Z-Offset Advanced
1 on +2 mm -

 Laser Parameters Engraving:

Color Process Power (%) Speed (%) ppi/Hz
Red Engraving CO2 15 15 1000
Passes Air Assist Z-Offset Advanced
1 on - -
laser engraving wrist watch
Langkah 3

Step 3: Post-processing

No post-processing is necessary. Due to the annealing process, the metal surface is not damaged which makes the watch comfortable to wear.

Seri Speedy
Pengukir dan pemotong laser yang ideal untuk personalisasi.

Temukan pengukir dan pemotong laser

Pertanyaan tentang aplikasi atau pengaturan?
Kami dengan senang hati akan memberikan saran kepada Anda mulai dari A untuk Air Assist hingga Z untuk z-offset.

Hubungi kami
Anggota kebanggaan troGROUP Logo