Seri Speedy: Mesin pemotong dan laser CO2 pengukir untuk format hingga 1016 x 610 mm
⚫ Pengukiran | ⚫ Pemotongan | ⚫ Penandaan |
Jenis Laser: | Laser CO₂, Flexx, atau Fiber |
---|---|
Bidang kerja: | 610 x 305 hingga 1016 x 610 mm |
Tinggi bidang kerja maks.: | 125 - 305 mm |
Daya Laser: | 20 - 120 watt |
Seri SP: Laser CO2 pemotong untuk bahan dengan format besar.
⚫ Pengukiran | ⚫ Pemotongan | ⎯ Penandaan |
Jenis Laser: | Laser CO₂ |
---|---|
Bidang kerja: | 1245 x 710 hingga 3250 x 3210 mm |
Tinggi bidang kerja maks.: | 50 - 112 mm |
Daya Laser: | 40 - 400 watt |
Stasiun laser penanda dengan kepala penanda galvo. Bidang penanda hingga 44,1 x 25,0 inci.
⚫ Pengukiran | ⎯ Pemotongan | ⚫ Penandaan |
Jenis Laser: | Laser CO₂ atau Fiber |
---|---|
Max. work area: | 190 x 190 hingga 1300 x 450 mm |
Tinggi bidang kerja maks.: | 250 - 764 mm |
Daya Laser: | 20 - 100 watt / 20 watt MOPA |
Presisi untuk produksi stent
Produksi stent membutuhkan presisi maksimum. Presisi, yang hanya dapat disediakan oleh perangkat laser untuk memotong pekerjaan. Dalam mengembangkan Speedcutter Twin Trotec telah menciptakan alat unik yang telah merevolusi pembuatan implan semacam ini.
Sebagai sistem laser tunggal untuk produksi stent, Speedcutter Twin dilengkapi dengan dua sumber laser fiber berpendingin udara identik yang mampu memotong dua stent secara bersamaan. Selain itu, laser membedakan dirinya melalui keandalan absolut dengan perawatan minimal. Sistem hemat-ruang dilengkapi dengan sistem pemuatan otomatis inovatif yang membuat tabung diumpankan dengan fokus sempurna.
Konstruksi granit yang kokoh dari mesin memastikan kekakuan absolut dan karenanya pengulangan yang paling besar. Sehingga, sistem dapat dioperasikan sepenuhnya otomatis dan menghasilkan stent 24 jam sehari - keuntungan ekonomi yang sangat besar bagi operator, tidak ditawarkan oleh sistem lain. Dengan perangkat lunak intuitif yang disertakan dan sudah diuji-coba sebelumnya dan terinstal, pengaturan geometri baru dan desain stent dapat dibuat dan diimplementasikan dalam waktu yang sangat singkat. Fleksibilitas untuk pabrik dan pelanggan.
Tim kami akan dengan senang hati membahas persyaratan khusus Anda.
System | Welded steel frame |
Fiber laser source | 1065 ± 5 nm; nominal power: 100 – 400 W; cooling system: air cooled (400 W water cooled); |
Femtosecond laser | Nominal power 4 – 25 W; pulse width: 400 – 1.000 fs; frequency: 100 – 1.000 kHz Cooling system: water/air cooled |
Cutting optics | Lengths of focus: ca. 80 mm; gas pressure: max. 25 bar |
Motion system rotary | Two rotary axes (direct driven) with pneumatic clamping for tubes with a diameter of 0,5 – 10 mm |
Motion system linear | Linear axis with linear motor; travel 250 mm; resolution 5 nm; Contour accuracy: better 5 μm |
Control | Aerotech NC-A3200, PLC |
Gas supply | Supply of two different process gases up to 25 bar; prepared for oxygen |
Every component needed for a perfect cut is directly mounted on the massive granite base construction, whose stiffness ensures positioning accuracy and repeatability. The patented tube guiding system keeps the stent tube constantly in focus – with minimized friction. That guarantees highest product quality and less rejects within your given tolerances.
Choose between a high performance fiber or femtosecond laser source to process your materials the best suiting way. The SpeedCutter is also the only laser system in its class that can be equipped with two sources and work parallel with two lasers. You want to enjoy maximum flexibility? Simply combine both sources and work with a Hybrid Twin System.
Use optional high performance galvos to increase your galvo marking laser's processing speeds.
If you start with a SpeedCutter Twin System with only one laser source and need larger production capabilities, an upgrade to a full Twin System is possible. The software is already prepared for this step. The Twin Option offers highest throughput per given footprint – and that means also for your investments.
The Atmos exhaust system ensures safe and clean operation of your laser system.