In this tutorial we will show you how you can produce a modern solid wood fruit bowl with your Trotec laser. The parts are connected without glue.
- 1 sheet of solid wood walnut 5 mm
Cover the working are completely with paper. By doing this even slightly bent sheets get flat.
® using the following parameters.
Wood is a natural product. It characteristics can vary. We recommend to test the parameters before you produce the work piece.
Set the parameters like described below. The laser parameters may vary depending on the type of your laser machine and available laser power.
|Color||Process||Power (%)||Speed (%)||ppi/Hz|
Clean the parts while they are still in the machine and the vacuum is on. By doing this you can efficiently wipe over the complete surface. Sort the different parts and put them together.
It is helpful to mark the front of the single pieces with adhesive tape so that you can assemble the pieces correctly.
- Cut the bowl out two different types of wood and mix the parts during assembly.
- Adding an engraving design or a name to the pieces creates a great effect. You can produce the bowls in advance and can add your customer's individual engraving afterwards.