In this guide, we show you how easy it is to use cardboard creatively. Laser your own individual business card racks or displays for city maps, flyers, brochures etcetera.

Preparation

Required material

Used material:

KATZ display board, neon or black, 1,6mm thickness

Trotec laser used:

Speedy 400, 80 watts, 1.5 inch lens;

Black Aluminium Cutting Grid Table

Step by Step

business card stand cardboard

Step 1: Graphics

Open our graphics template or create your own design. We have prepared two design suggestions:

  • Business card rack with name
  • Display for brochures or city maps with the corresponding skyline

In this video tutorial we show you how to get from a picture of your choice to the drawn skyline.

See tutorial

cardboard display laser cutting

Step 2: Laser process

Laser parameters:

Engraving: Power: 20% - Speedy: 30% - Frequency: 500ppi – Air-Assist: ON – Z-Offset: +0,5mm
Slitting: Power: 6% - Speed: 0,6% - Frequency: 1000 Hz – Air-Assist: ON
Cutting: Power: 15% - Speed: 0,5% - Frequency: 1000 Hz – Air-Assist: ON

business card stand instructions

Step 3: Assembly

  1. Take the stand and rotate the lower part with the engraving to the left.
  2. Bend the same part inwards, using the scribed lines.
  3. Insert the tabs into the slits intended for that purpose. During this step, make sure that you do not exert too much pressure onto the pattern for the rounding.
  4. For improved stability, eventually bend the top of the tab at the scribed line inward.
  5. Now only your business cards are missing.

Downloads:

Template Download JobControl

laser etcher speedy

Laser Engravers - Speedy Series

Speedy series: CO2 laser engraving and cutting machines for formats up to 1016 x 610 mm

Product Details

Contact

Contact Trotec

Laser and Rotary Materials

More details

Store Locator

Find the nearest Trotec office