Individual place cards can create a lasting memory of a successful party. Kako biste pregledali naš cijeli raspon materijala, posjetite www.trotec-materials.com
Materijal za pokrivanje stola za graviranje (npr. papir)
Korišteni stroj:
Speedy 360 flexx
80 vata CO2/20 vata fiber laser with 2.85" flexx leća
For this sample you should use any laser machine from the Speedy flexx serija.
Važno:
Koristite akrilni rešetkasti stol za rezanje
Leave the protective foil on the back of the material during cutting. It protects the acrylic from scratches.
Korak po korak
1. korak: Uvezi / stvori predložak dizajna
Import our design template into your graphic program, add the names, and then send it to your laser.
Postavke ispisa
Način obrade
Rezolucija
Rezna linija
Standard
333 dpi
nijedna
Poluton
Drugo
Boja
enhance geometries
2. korak: Laserska obrada
For best results, we recommend using the akrilni rešetkasti stol za rezanje. It avoids back reflections on the material. Position the acrylic sheet into your laser and cover the rest of the table to maximize the exhaust power. Mark and cut the design out of TroGlass.
Parametri lasera:
Boja
Proces
Snaga (%)
Brzina (%)
ppi/Hz
Crna
graviranje FLP
74
40
75000
Crvena
rezanje CO2
85
0.5
20000
Prolazi
Air Assist
Z-Offset
Napredno
1
off
-
-
1
uključeno
-
-
Info:
The 2.85" flexx lens has a lower intensity on the material than the 2" lens. This is why we haven't used the standard laser parameters for TroGlass.
3. korak: Naknadna obrada
Clean the surface with a soft cloth and put the zebra into the base stand.
Inspiracija
On dark acrylic you can achieve particularly good results with the fiber laser source of the Speedy flexx.
