Carte de menu photogravée
Réalisez votre propre carte de menu photogravée à partir du matériau TroLase de la marque Trotec.
Préparation
Required material
- quarter sheet of 1.6mm pink/white TroLase (available at Trotec)
- quarter sheet of 0.5mm black/white TroLase Thins with self-adhesive back (available at Trotec)
- a binding screw
- paper for content
Machine used
- Speedy 360, 80 Watts
- 1.5" lens
- vacuum table with acrylic cutting grid table
You can also create this sample using any machine from the Speedy series.
Important
- for a detailed engraving of a photo we recommend using the 1.5" lens
- for a good cutting result we recommend using the acrylic cutting grid table
Étape par étape

Step 1: Cover Sheet
You can start by creating your own design, or you can use our template. With the integrated Photo mode, our JobControl Laser Software supports you perfectly when engraving photos. Get more detailed information and tips and tricks for photoengraving here:
Send your design to the laser using following settings:
Process | Resolution | Cut line |
---|---|---|
Photo optimized | 600 dpi | none |
Halftone | Others |
---|---|
Ordered dithering | - |

Step 2: Laser process cover sheet
Set the parameters as described below. The laser parameters may vary depending on the type of laser machine you are using and available laser power.
Laser Parameters
Color | Process | Power (%) | Speed (%) | ppi/Hz |
---|---|---|---|---|
black | engraving CO2 | 50 | 80 | 600 |
red | cutting CO2 | 6 | 5 | 1000 |
blue | cutting CO2 | 60 | 1.2 | 1000 |
Passes | Air Assist | Z-Offset | Advanced |
---|---|---|---|
1 | on | 1 mm | - |
1 | on | - | - |
1 | on | - | - |
Info:
- Run the engraving from bottom to top so that the dust can be perfectly exhausted. (This minimizes cleaning.)
- For cutting, we used the JobControl® standard parameter for quality
- You can download the JobControl® material parameter from www.troteclaser.com

Step 3: Material Handling
Remove the protective foil from the pink TroLase material and put it into your Trotec laser. Run the engraving (black) and the cut jobs (red and blue).

Step 4: Rhombic pattern
As an eye catcher, we combined two different materials for our menu card. Send the second graphic, the rhombic pattern, to your Trotec laser by using the following parameters:
Tip:
- We use the JobControl® standard parameter optimized for quality.
Print settings
Process mode | Resolution | Cut line |
---|---|---|
Standard | 600 dpi | none |
Halftone | Others |
---|---|
color | - |

Step 5: Laser process rhombic pattern
Put your TroLase Thin material in your Trotec-Laser. Remove the protective foil, run the engraving job from bottom to top, and cut the job.
Important:
Because of the size it is important to have very good vacuum. You can increase your vacuum power by covering the rest of your working area with paper.
Laser Parameter
Color | Process | Power (%) | Speed (%) | ppi/Hz |
---|---|---|---|---|
black | engraving CO2 | 60 | 80 | 600 |
red | cutting CO2 | 30 | 1.5 | 1000 |
Passes | Air Assist | Z-Offset | Advanced |
---|---|---|---|
1 | on | 1 mm | High Quality |
1 | on | - | - |

Step 6: Post-processing
Clean the surface and the edges of both TroLase-materials with a damp cloth. Take the rhombic pattern and apply it to the photoengraved cover. Finally, add your content to the menu card and clip it with the binding screw. And voilà - be proud of your unique menu card.
Tipp:
You can print the content-sheets of your menu card and cut it with the laser. Our JobControl® Vision laser software then supports you in cutting out the printed sheets with highest precision.
Préparation
Matériel requis
- quart de plaque d'1,6mm de TroLase rose/blanc (disponible chez Trotec)
- quart de plaque de 0,5mm de TroLase Thins noir/blanc avec une face arrière autoadhésive (disponible chez Trotec)
- une vis de reliure
- papier pour le contenu
Machine utilisée
- Speedy 360, 80 watts
- lentille 1,5"
- plateau aspirant avec plateau de découpe à grille en acrylique
Vous pouvez aussi créer cet échantillon en utilisant n'importe quelle autre machine de la série Speedy.
Important
- pour une photogravure détaillée, nous recommandons l'utilisation d'une lentille 1,5"
- pour un bon résultat de découpe, nous recommandons l'utilisation du plateau de découpe à grille en acrylique
Étape par étape

Étape 1 : Page de couverture
Vous pouvez commencer en créant votre propre design, ou vous pouvez utiliser notre modèle. A partir du mode Photo intégré, notre logiciel laser JobControl vous assiste parfaitement lors de la réalisation de photogravure. Obtenez plus d'informations et des trucs et astuces pour la photogravure ici :
Trucs et astuces pour la photogravure
Envoyez votre design au laser en utilisant les paramètres suivants :

Step 2: Laser process cover sheet
Réglez les paramètres comme cela est décrit ci-dessous. Les paramètres laser peuvent varier en fonction du type de la machine laser que vous utilisez et de la puissance laser disponible.

Étape 3 : Préparation du matériau
Retirez le film de protection de la matière TroLase rose et insérez-la dans votre laser Trotec. Lancez les tâches de gravure (noir) et de découpe (rouge et bleu).

Étape 4 : Modèle losange
Pour attirer l'attention, nous avons combiné deux matières différentes pour notre carte de menu. Envoyez le deuxième graphique, le modèle "losange" vers votre laser Trotec en utilisant les paramètres suivants :
Astuce :
- Nous utilisons les paramètres JobControl® standard optimisés pour la qualité.

Étape 5 : Processus laser du modèle "losange"
Insérez votre matière TroLase Thins dans votre laser Trotec. Retirez le film de protection, lancez la tâche de gravure du bas vers le haut, et découpez la tâche.

Étape 6 : Post-traitement
Nettoyez la surface et les bords des deux matières TroLase avec un chiffon humide. Prenez le modèle gravé avec les losanges et appliquez-le sur la couverture photogravée. Ensuite, ajoutez votre contenu au menu et fixez-le à l'aide de la vis de reliure. Et voilà - vous pouvez être fier de votre carte de menu unique !
Inspirations
Bien entendu, vous pouvez aussi créer d'incroyables cartes de menu à partir de matières telles que TroGlass ou notre Bois Trotec. Voici quelques exemples.