Sous-verre en acrylique et en bois
Create some great effects with different materials without wasting any.
(To browse the full list of materials, please visit www.trotec-materials.com)
Créez des dessous de verre avec une combinaison de deux matières différentes.
Vous trouverez plus d'informations sur notre boutique en ligne : www.matieres-a-graver.fr
Préparation
Matériel requis
- 2 plaques de TroGlass Color Gloss, dont une adhésivée (disponible chez Trotec)
- 2 panneaux en bois d'aulne de 3 mm, dont un adhésivé (disponible chez Trotec)
- Matériel pour recouvrement du plateau et ruban adhésif
Machine utilisée
- Speedy 360 flexx
- 100 watts avec lentille 1,5"
Pour cet échantillon, vous pouvez utiliser toute machine laser de la série Speedy.
Important
- Utilisez le plateau de découpe grille acrylique ou le plateau de travail à lames acryliques
- Retirez le film de protection du côté de l'acrylique que vous souhaitez graver. En laissant le film de protection en bas, il protège la plaque acrylique des rayures pendant la manipulation.

Étape par étape

Étape 1: Importer / créer des modèles de design
Importez notre modèle de design dans votre programme graphique et adaptez-le à vos besoins. Retirez le film de protection sur le côté de l'acrylique que vous souhaitez graver.
PARAMÈTRES D'IMPRESSION
Mode de traitement | Résolution | Ligne de coupe |
---|---|---|
standard | 500 dpi | aucune |
Demi-ton | Autres |
---|---|
Noir et blanc | géométries améliorées |

Étape 2: Processus laser
Gravez et découpez le design (B) à partir de la plaque d'acrylique avec le ruban adhésif. Pour des résultats parfaits, nous recommandons l'utilisation d'un plateau de découpe grille acrylique ou un plateau de travail à lames acryliques. Ces plateaux minimisent les réflexions du faisceau laser à l'arrière du matériau. Couvrez le reste du plateau et retirez le film protecteur du côté supérieur.
Ensuite, découpez le contour extérieur (B) de l'acrylique sans ruban adhésif.
PARAMÈTRES LASER ACRYLIQUE
Couleur | Traitement | Puissance (%) | Vitesse (%) | ppi/HZ |
---|---|---|---|---|
noir | Gravure CO2 | 14 | 20 | 500 |
rouge | Découpe CO2 | 100 | 1 | 1000 |
Passages | Assistance d'air | Offset Z | Avancés |
---|---|---|---|
1 | allumée | - | - |
1 | allumée | - | - |
PARAMÈTRES LASER AULNE
Couleur | Traitement | Puissance (%) | Vitesse (%) | ppi/HZ |
---|---|---|---|---|
noir | Gravure CO2 | 45 | 50 | 500 |
rouge | Découpe CO2 | 100 | 1.4 | 1000 |
Passages | Assistance d'air | Offset Z | Avancés |
---|---|---|---|
1 | allumée | 6 | - |
1 | allumée | - | - |
INFO:
- Nous avons utilisé les paramètres laser standard de JobControl optimisés pour la vitesse
- Grâce à l'offset Z, vous obtenez une gravure particulièrement lisse
- Les paramètres des matériaux de JobControl peuvent être téléchargés à partir de www.troteclaser.com
Étape 3: Post-traitement
La matière ne requiert pas de nettoyage après la gravure et la découpe. Retirez simplement le film de protection situé à l'arrière des éléments en acrylique coupés. Retirez le papier de protection des cercles découpées et positionnez alternativement les pièces en acrylique et celles en bois en commençant par l'extérieur. Ainsi, vous créez de grands effets avec deux matières différentes sans gaspillage de matériau.

Inspirations
- Selon votre goût personnel, vous pouvez obtenir des résultats encore plus parfaits en utilisant les paramètres laser "Qualité"
- Sur de l'acrylique foncé, vous pouvez obtenir des beaux résultats avec la source laser fibré de la Speedy flexx
- Si vous utilisez une lentille 1,5", la gravure sur l'acrylique devient très lumineuse. Un matériau de 3 mm peut également être coupé avec cette lentille
Préparation
Required material
- 2 sheets of TroGlass Color Gloss, one with double-sided adhesive tape (available at Trotec)
- 2 sheets of Alder wood 0.11'' thick, one with double-sided adhesive tape (available at Trotec)
- Covering material and adhesive tape
Machine used
- Speedy 360 flexx
- 100 Watt with 1.5" lens
For this sample you can use any laser machine from the Speedy Series.
Important
- Use the acrylic cutting grid table or the acrylic slat cutting table.
- Remove one side of the protective foil from the acrylic. Next, leave on the remaining layer of foil to protect the acrylic sheet from getting scratches during handling.

Étape par étape

Step 1: Import /create design template
Import our design template into your graphic program and adapt it according to your needs. Remember to remove the protective foil from the side of the acrylic that you want to engrave on.
PRINT SETTINGS
process mode | resolution | cut line |
---|---|---|
standard | 500 dpi | none |
halftone | others |
---|---|
black & white | enhanced geometries |

Step 2: Laser process
Engrave and cut out the design (B) from the acrylic sheet with adhesive tape. For the best results, we recommend using an acrylic cutting grid table or an acrylic slat cutting table. These tables minimize the reflections of the laser beam on the back of the material. Cover the rest of the table and don't forget to remove the protective film from the top side.
Next, cut the outer contour (B) from the acrylic without adhesive tape.
LASER PARAMETERS FOR ACRYLIC
colour | process | power (%) | speed (%) | ppi/HZ |
---|---|---|---|---|
black | engrave CO2 | 14 | 20 | 500 |
red | cut CO2 | 100 | 1 | 1000 |
passes | Air Assist | Z-Offset | Advanced |
---|---|---|---|
1 | on | - | - |
1 | on | - | - |
LASER PARAMETERS FOR ALDER WOOD
colour | process | power (%) | speed (%) | ppi/HZ |
---|---|---|---|---|
black | engrave CO2 | 45 | 50 | 500 |
red | cut CO2 | 100 | 1.4 | 1000 |
passes | Air Assist | Z-Offset | Advanced |
---|---|---|---|
1 | on | 6 | - |
1 | on | - | - |
ADDITIONAL INFO:
- We used the standard laser parameters from Jobcontrol®, which are optimized for speed
- Thanks to the z-offset, you get a particularly smooth engraving
- The material parameters used in JobControl® can be downloaded from www.troteclaser.com
Step 3: Post-processing
The material requires no cleaning after engraving and cutting, just remove the protective foil from the back of the acrylic elements that was cut. Remove the cover of the cut-out circles and alternate the positions of the acrylic and wood starting from outside. The combination of the different materials will create a cool effect.

Inspirations
- If you wish, you can optimize your results by using the "quality" laser parameters
- The fiber laser of the Speedy flexx will create good results with some darker acrylic
- The acrylic will become very bright if you use a 1.5" lens to engrave. You can also cut a 0.11'' material with this lens.