Ladrillo grabado con láser
Descubra cómo hacer un regalo original para los constructores de viviendas usando un simple ladrillo de arcilla.
![diy-present-housewarming-party](/static_processed/e965f0eda1d93bfd5e1a8cd839399aa4/.jpg?{"image":"https://backend.troteclaser.com/static/images/knowledge/diy-samples/engraved-brick/diy-present-housewarming-party.jpg","edits":{"extract":{"top":271,"left":0,"width":3434,"height":1715},"resize":{"width":1280,"height":640,"fit":"cover"}}})
![diy-present-housewarming-party](/static_processed/b65203aef30823c3bea816265be652b3/.jpg?{"image":"https://backend.troteclaser.com/static/images/knowledge/diy-samples/engraved-brick/diy-present-housewarming-party.jpg","edits":{"extract":{"top":267,"left":0,"width":3434,"height":1715},"resize":{"width":1280,"height":640,"fit":"cover"}}})
Preparación
Required material
- Clay brick from the DIY store
Machine used
- Speedy 360, 100 Watt
- 1.5" lens
- Vacuum table
For this sample you can use any laser machine from the Speedy laser engraver series.
Tip
We used the 1.5" lens because we wanted to engrave a plan with many details. For design with less details, use the 2" lens.
Paso a paso
![Parámetros para grabado de ladrillo con láser](/static_processed/94ed8ac0ab8b6608208535501dd3b178/ladrillo-grabado-ajustes-del-controlador-de-impresion.JPG?{"image":"https://backend.troteclaser.com/static/images/knowledge/diy-samples/engraved-brick/laser-engraved-brick.JPG","edits":{"resize":{"width":650,"fit":"cover"}}} "laser-engraved-brick.JPG")
Step 1: Import design
Make your own design or import our template. Send the job to the laser using the driver settings below.
Print driver settings
| Process mode | Resolution | Cut line |
|---|---|---|
| Standard | 500 dpi | none |
| Halftone | Others |
|---|---|
| Color |
![Ladrillo personalizado con láser](/static_processed/5de63f884bffb6e861feb5aae5c01841/ladrillo-grabado-laser.jpg?{"image":"https://backend.troteclaser.com/static/images/knowledge/diy-samples/engraved-brick/brick-laser-engraving.jpg","edits":{"resize":{"width":650,"fit":"cover"}}} "brick-laser-engraving.jpg")
Step 2: Engraving the brick
Put the brick into your Trotec laser and focus on the surface of the material. Make the material parameter settings. The parameters can vary depending on laser machine and available laser power.
Laser Parameters engraving
| Color | Process | Power (%) | Speed (%) | ppi/Hz |
|---|---|---|---|---|
| black | engrave CO2 | 100 | 30 | 500 |
| Passes | Air Assist | Z-Offset | Advanced |
|---|---|---|---|
| 1 | on | +1 mm | high quality |
![Ladrillo grabado con láser](/static_processed/0ff6f4f8e5ea65fce3e5adcbec6778cb/ladrillo-grabado-con-laser-detalle.jpg?{"image":"https://backend.troteclaser.com/static/images/knowledge/diy-samples/engraved-brick/laser-engraving-brick-detail.jpg","edits":{"resize":{"width":650,"fit":"cover"}}} "laser-engraving-brick-detail.jpg")
Step 3: Cleaning
Use a wet sponge to clean the surface and bind the dust. - This original present is ready to be sold.
Preparación
Material necesario
- Ladrillo de arcilla
Máquina usada
- Speedy 360, 100 vatios
- Lente de 1,5 pulgadas
- Mesa de vacío
Para hacer esta muestra puede usar cualquier máquina láser de la serie de grabadoras láser Speedy.
Sugerencia
Hemos usado una lente de 1,5" porque nuestro grabado tiene muchos detalles. Si su diseño no es tan complejo puede usar una lente de 2 pulgadas sin problemas.
Paso a paso
Paso 1: Importar diseño
Haga su propio diseño o importe nuestra plantilla. Envíe el trabajo al láser usando los ajustes del controlador mencionados abajo.
Ajustes del controlador de impresión
| Modo de procesamiento | Resolución | Línea de corte |
|---|---|---|
| Estándar | 500 dpi | Ninguna |
| Medio tono | Otros |
|---|---|
| Color |
Paso 2: Grabando el ladrillo
Coloque el ladrillo dentro de su láser Trotec y enfoque en la superficie del material. Ajustes los parámetros de material de acuerdo a los mostrados mas abajo. Los parámetros pueden variar dependiendo de la máquina láser que tenga y de la potencia de su láser.
Parámetros láser para grabado
| Color | Proceso | Potencia (%) | Velocidad (%) | ppi/Hz |
|---|---|---|---|---|
| Negro | Grabar CO2 | 100 | 30 | 500 |
| Pasadas | Aire Asistido | Offset z | Avanzado |
|---|---|---|---|
| 1 | Activado | +1 mm | Alta calidad |
Paso 3: Limpieza
Use una esponja mojada para limpiar la superficie y quitar el polvo y... ¡Listo!
![engraved-bricks-inspirations](/static_processed/134a8a4db75897a4c978014f2dfa4872/.jpg?{"image":"https://backend.troteclaser.com/static/images/knowledge/diy-samples/engraved-brick/engraved-bricks-inspirations.jpg","edits":{"resize":{"width":640,"fit":"cover"}}})
Un poco de inspiración
Personalice los ladrillos poniendo fechas, logotipos, frases...
![](/static_processed/fc17f3f08cabee36be9428851f6288f3/laser-engraver-speedy-400-left.png?{"image":"https://backend.troteclaser.com/static/images/Laser_Machines/Speedy_Series/laser-engraver-speedy-400-left.png","edits":{"extract":{"top":142,"left":497,"width":933,"height":393},"resize":{"width":470,"fit":"cover"}}})
![](/static_processed/be02a368e247553be5ca098932b53787/contact-ferdinand.jpg?{"image":"https://backend.troteclaser.com/static/images/contact/contact-ferdinand.jpg","edits":{"resize":{"width":80,"height":80,"fit":"cover"}}})
