Linterna de Halloween
Instrucciones paso a paso
In this tutorial we will show you how to make a spooky Halloween lantern. For this lantern, we used TroGlass Color Gloss in Orange and Black. You will find the graphic file and the JobControl® laser parameters at the end of the page.
Preparación
Required material
- 1/4 sheet of TroGlass Color Gloss black or orange
- Acrylic glue
Machine used
- Speedy 400 80 watt
- 2" lens
- Vacuum table with acrylic cutting grid
Tips
Use the 2" lens for best cutting results.
Remove the protective foil on the back of the acrylic after cutting. This prevents the material from being scratched.
Paso a paso
Step 1: Preparation
Import our graphic or create your own design. Remove the protective foil from the front of the acrylic and put the material into the laser.
Send the job to the laser using the settings below.
Print settings
Process mode | Resolution | Cut line |
---|---|---|
Standard | 500 dpi | none |
Halftone | Others |
---|---|
Color | Optimized geometries, inner geometries first |
Step 2: Laser process
Define the necessary parameters. They might vary depending on the machine used and the available laser power.
Laser Parameters
Color | Process | Power (%) | Speed (%) | ppi/Hz |
---|---|---|---|---|
black | Cut CO2 | 16 | 20 | 500 |
red | Cut CO2 | 50 | 0.2 | 5000 |
Passes | Air Assist | Z-Offset | Advanced |
---|---|---|---|
1 | on | - | - |
1 | on | - | - |
Step 3: Assembly
Remove the protective foil from the back of the material. Clean the pieces with a damp cloth and mild detergent. Assemble the five pieces and use the acrylic glue to fix them. Your Halloween lantern is ready to scare your guests!
Preparación
Material necesario
- 1/4 de hoja de TroGlass Color Gloss negro o naranja
- Pegamento para acrílico
Máquina usada
- Speedy 400 80 W
- lente de 2"
- Mesa de vacío cuadriculada para corte de acrílico
Consejos
Use la lente de 2 pulgadas para obtener resultados de corte perfectos
Quite la lámina protectora en la parte posterior del acrílico después de haber cortado. Esto evita que se produzcan arañazos en el material
Paso a paso
Paso 1: Preparación
Importe nuestro diseño o cree el suyo propio. Quite la lámina protectora del frente del metacrilato y coloque el material en el láser.
Envíe el trabajo al láser usando los parámetros mencionados abajo, a través del comando "Imprimir"
Ajustes de impresión
Modo de procesamiento | Resolución | Línea de corte |
---|---|---|
Estándar | 500 dpi | Ninguna |
Medio tono | Otros |
---|---|
Color | Geometrías optimizadas, primero las geometrías internas |
Paso 2: Procesamiento con láser
Defina los parámetros necesarios. Pueden variar dependiendo de la máquina utilizada y de la potencia disponible del láser.
Parámetros láser
Color | Proceso | Potencia (%) | Velocidad (%) | ppi/Hz |
---|---|---|---|---|
Negro | Corte CO2 | 16 | 20 | 500 |
Rojo | Corte CO2 | 50 | 0.2 | 5000 |
Pasadas | Asistencia de aire | Offset Z | Avanzado |
---|---|---|---|
1 | Activada | - | - |
1 | Activada | - | - |
Paso 3: Ensamblaje
Quite la lámina protectora del dorso del material. Limpie las piezas con un paño húmedo y detergente suave. Ensamble las cinco piezas y use el pegamento de acrílico para fijarlas. ¡Su linterna de Halloween está lista para asustar a sus invitados!