Funda para ordenador portátil de Softshell
Use su láser para cortar, marcar o grabar textiles. Usamos material Softshell para crear esta funda personalizada para portátil.
Preparación
Required material
- Softshell or other synthetic or semi-synthetic fabric, minimum 800 x 400 mm
- Sewing needle and thread
- Eyelet set (available from DIY superstore or crafts store)
- Elastic band
Machine used
- Speedy 400, 120 Watts
- 1.5" lens
- Honeycomb cutting table
For this sample you can use any laser machine from the Speedy laser engraver series.
Tips
Why not experiment with different engravings and artwork for a personalised effect?
Paso a paso
Step 1: Design
Import our template or create your own design. The file provided is suitable for a 14" laptop, but you can easily adapt it to any other size.
The design consists of two parts: The outer part with pattern; and the inner part with outside contour and marking for the seam.
Send the job to the laser using the following printer driver settings:
Print Settings:
Standard | 500 dpi | none |
Process mode | Resolution | Cut line |
---|
Colour | Optimized geometries, inner geometries first |
Halftone | Others |
---|
Step 2: Engraving and cutting process
Please test the material before you start engraving the bag.
Position the fabric into the laser with the inside down and start with the first graphic. Of course, you can personalise and individualize the bag before that. Once you have cut out the laptop cover, turn it and use the laser to mark the seam line (if required)
Adjust the parameter settings. The parameters can differ depending on the laser machine used and laser power available. (Please note: the parameters for black are only necessary if you also want to engrave it.)
Laser Parameters (optional):
Colour | Process | Power (%) | Speed (%) | ppi/Hz |
---|---|---|---|---|
Black | Engrave CO2 | 80 | 30 | 500 |
Passes | Air Assist | Z-Offset | Advanced |
---|---|---|---|
1 | on | - | - |
Laser Parameters (cutting):
Colour | Process | Power (%) | Speed (%) | ppi/Hz |
---|---|---|---|---|
Red | Cut CO2 | 10 | 1.5 | 1000 |
Blue | Cut CO2 | 7 | 2 | 1000 |
Colour | Passes | Air Assist | Z-Offset | Advanced |
---|---|---|---|---|
Red | 1 | on | - | - |
Blue | 1 | on | +3mm | - |
Step 3: Finishing
Insert the eyelet before you close the lateral seam. Please follow the instructions provided with the eyelets.
Then close the seam on the left and the right side of the cover. The scratching lines help you to use the correct position for the seam.
Now insert the rubber band, knot it together and your laptop bag is ready.
Preparación
Material necesario
- Softshell u otra tela sintética o semisintética con una medida mínima de 800 x 400 mm
- Aguja e hilo de coser
- Conjunto de ojales
- Banda elástica
Máquina usada
- Speedy 400 de 120 vatios
- Lente de 1,5"
- Mesa de corte en panal de abeja
Para hacer esta muestra puede utilizar cualquier máquina láser de la serie Speedy o serie SP.
Consejo
Cree una gran variedad de fundas personalizando los diseños a su gusto o el de sus clientes. Puede grabar imágenes artísticas, figuras abstractas, etc.
Paso a paso
Paso 1: Importar / Crear plantilla
Importe nuestra plantilla o cree su propio diseño. En el caso de usar nuestro archivo, debe tener en cuenta que está pensado para un portátil de 14 ", pero puede adaptarlo fácilmente al tamaño que necesite.
Nuestro diseño consta de dos partes, la parte exterior con patrón y la parte interior con contorno exterior y marcado para la costura. Envíe el trabajo al láser usando los siguientes ajustes de impresión:
Ajustes de impresión:
Estándar | 500 dpi | No hay |
Modo de procesamiento | Resolución | Línea de corte |
---|
Color | Geometrías mejoradas, Geometrías internas primero |
Medio tono | Otros |
---|
Paso 2: Proceso de grabado y corte
En este caso le recomendamos probar el material antes de comenzar a grabar la pieza final.
Coloque la tela en el láser con el interior hacia abajo y comience con el primer gráfico. Una vez que haya cortado la cubierta de la funda, gírela para el proceso de marcado de la línea de costura (si fuera necesario). Corte la base usando los siguientes parámetros. Tenga en cuenta que los parámetros recomendados pueden variar dependiendo de la máquina láser utilizada y de la potencia de la misma.
Parámetros láser (grabado):
Color | Proceso | Potencia (%) | Velocidad (%) | ppi/Hz |
---|---|---|---|---|
Negro | Grabado CO2 | 80 | 30 | 500 |
Pasadas | Aire Asistido | Offset Z | Avanzado |
---|---|---|---|
1 | Activado | - | - |
Parámetros láser (corte):
Color | Proceso | Potencia (%) | Velocidad (%) | ppi/Hz |
---|---|---|---|---|
Rojo | Corte CO2 | 10 | 1,5 | 1000 |
Azul | Corte CO2 | 7 | 2 | 1000 |
Color | Pasadas | Aire Asistido | Offset Z | Avanzado |
---|---|---|---|---|
Rojo | 1 | Activado | - | - |
Azul | 1 | Activado | +3mm | - |
Paso 3: Montaje
Inserte el ojal antes de cerrar la costura lateral. Por favor, siga las instrucciones proporcionadas con los ojales.
Luego cierre la costura de la izquierda y la derecha de la cubierta. Las líneas de rasguñado le ayudan a usar la posición correcta para la costura.
Ahora inserte la banda elástica, anúdela y su bolso para computadora portátil estará listo.