--------------------------
wooden candle holder laser cut

Laser-Cut Wooden
Tea Light Holder

This playful wooden tea light holder is your ideal gift for Valentine's Day.

Here you can find instructions and template files for laser cutting. If you wish, you can additionally engrave a personal message or a date on the tea light holder. We have used alder wood for this application. If you use a different wood type, you might have to adapt the laser parameters slightly.

Preparation

Required material
  • 3 mm alder wood
  • 1 tea light
Used Trotec Laser
  • Speedy 300
  • 60 watts
  • 1.5 inch lens
Tips
  • Use the 1.5 inch lens
  • Use a light and hard wood type to achieve a marked contrast of the cutting edges 
csm_Tea-Light-Holder-template_ad8ec6e3cd.png

PDF

Download now
Wood Tea Light Holder

ZIP

Download now

Step by step

tea light holder laser cutting
Step 1

Step 1:

Open the cutting template and send it to the laser. Use the laser parameters indicated below for cutting and engraving. The parameters might vary depending on the laser machine used and its power category.

LASER SETTINGS

Engraving (black) - power: 90 %, speed: 50 %, resolution: 500 dpi, exhaust system: on
Cutting (red) - power: 95 %, speed: 1 %, frequency: 1000 Hz, exhaust system: on, correction: 10 

candle holder parts assembly
Step 2

Step 2:

Once you have cut and engraved the parts you can assemble them.

Speedy series
The ideal laser engraver and cutter for personalisation.

Discover laser engravers and cutters

Questions about applications or settings?
We're happy to advise you from A for Air assist to Z for z-offset.

Contact us
Proud member of troGROUP Logo