"Tea House" wooden sign

Import the PDF template into Corel Draw and select the desired picture.

download design PDF

ALDER

Engraving (black): Power: 15%, Speed: 20%, Resolution 500 ppi, Air Assist: ON, Z-offset: +1mm
Scoring (red): Power: 5%, Speed: 1%, Frequency: 1000 Hz, Air Assist: ON
Cutting (blue): Power: 64%, Speed: 0.8%, Frequency: 1000 Hz, Air Assist: ON

WALNUT

Engraving (black): Power: 60%, Speed: 30%, Resolution 500 ppi, Passes: 4, Air Assist: ON, High quality
Cutting (red): Power: 100%, Speed: 1%, Frequency: 1000 Hz, Air Assist: ON

Cut out all the elements from the various wooden boards.
For the cups, in the JobControl® print window assign the "Relief" process option, for everything else use the standard process option.

In addition, select "Optimized Geometries" and "Inner Geometries first" to get a nicer result.

TIP:

For the relief engraving, make sure that the job is not placed over the joint of two glued wooden boards because the laser cannot erode the glue.

Remove the protective film of the adhesive on the parts and stick them in the appropriately marked positions on the base plate.