- Wood veneer
- TroLase Thins with double-sided adhesive tape
- TroLase - thickness: 3.2mm
- Speedy 400 120 watt
- 2" lens
- Vacuum table with honeycomb cutting tabletop or acrylic cutting grid
For this application sample you can use any laser machine from the Speedy laser enagraver series.
We advise keeping the clear protective film on the laminate materials if you are only cutting it.
Step 1: Import design file into Software
Feel free to make your own design or use our provided template. Upload it to the laser with the recommended laser parameters given. Always remember that the parameters might differ, depending on the machine used and the available laser power as well as material thickness.
|color||enhanced geometries, inner geometries first|
Step 2: Cutting and engraving on Wood veneer and TroLase
Next, gently lay the material on the honeycomb cutting table of your laser. By covering the exposed work area, you will create a stronger vacuum, which will help with the material not shifting. The parameters can differ depending on the laser machine used and laser power available.
|Laser process||Color||Process||Power (%)||Speed (%)|
|Engraving Wood veneer||Black||Engraving||80||100|
|Cutting Wood veneer||Red||Cutting||90||1.3|
|TroLase 3.2 mm||Red||Cutting||85||1.2|
|Cutting TroLase Thins 0.5 mm||Red||Cutting||100||1.5|
|Engraving TroLase Thins 0.5 mm||Black||Engraving||40||25|