Engraved birthday calendar

Find out here, how you can turn a IKEA pin board "Väggis" and aluminum tags into a birthday calendar.

Preparation

Required material
Machine used
  • Speedy 360, 80 Watt
  • 2" lens
  • Vacuum table
  • Acrylic cutting grid
  • Aluminum cutting grid table for the wood cuts

The birthday calendar can produced with any machine from the Speedy family.

Important
  • For the best results, use the acrylic cutting grid for TroGlass and the aluminum cutting grid for wood
  • Cover the rest of the engraving table to maximize the exhaust efficiency.
Birthday Calendar Cork

ZIP

Download now

Step by step

Step 1

Step 1: Graphic for cork engraving

Design your own birthday calendar or download our design template. Send it to the laser using the following parameters:

Print settings

Process mode Resolution Cut line
Standard 500 dpi none
Halftone Others
color -
Step 2

Step 2: Engraving the pin board

Position the cork pin board on the vacuum table into your Trotec laser and use the settings as mentioned below.

Tip:

It can be possible that the pin board is not perfectly flat. Therefore, please check the focus on several positions of the pin board. In case of deviations use a average value for the focus.

Laser Parameters:

Color Process Power (%) Speed (%) ppi/Hz
black engrave CO2 22 70 500
red engrave CO2 50 70 500
Passes Air Assist Z-Offset Advanced
1 on - High quality
1 on - High quality
Step 3

Step 3: TroGlass letters

As an eye catcher we combined two materials for the headline and applied it on the frame. First send the graphic "birthday calendar" to the laser using the following parameters.

Print settings

Process mode Resolution Cut line
Cut Job 1000 dpi none
Halftone Others
color enhanced geometries,
inner geometries first
Step 4

Step 4: Decoration

Put the acrylic cutting tabletop onto the vacuum table and cut the letters out of TroGlass with double-sided adhesive tape. After cutting, put a stripe of paper tape on the letters to keep them in position.

Tip:

We used the quality-optimized parameters for TroGlass from JobControl

Laser Parameters

Color Process Power (%) Speed (%) ppi/Hz
red Cut CO2 50 0,2 5000
Passes Air Assist Z-Offset Advanced
1 on - -
Step 5

Step 5: Wood covering for letters

For a better visibility of the TroGlass letters, we glue it on a base plate from wood veneer. Therefore, send the second graphics to the laser using the following parameters:

Process mode Resolution Cut line
Cut Job 1000 dpi none
Halftone Others
color enhanced geometries
inner geometries first
Step 6

Step 6: Laser process wood baseplate

Now remove the vacuum table and insert the aluminum cutting grid table instead. Put the veneered wood into your Trotec laser, cut out the job and clean it with a damp cloth.

Laser Parameters

Color Process Power (%) Speed (%) ppi/Hz
red Cut CO2 100 0,8 1000
Passes Air Assist Z-Offset Advanced
1 on - High quality
assemble-birthday-calendar
Step 7

Step 7: Assembly

With the last step, glue the green TroGlass letters onto the veneered birch. As a test, position the letters on the frame of the pin board and mark the left and right edges. Now glue the letters on the frame of the pin board. After a short drying period your pin board is ready.

birthday-calendar-inspirations

Inspiration

  • To complete the calendar, use the aluminum tags from the Trotec product range. This offers you maximum flexibility in fulfilling your customers' needs.
  • To engrave multiple tags in one step, a template can be helpful. The instruction is available online: Creating templates 
  • In addition you can add some engravings directly on the wooden frame of the pin board.

Speedy series
The ideal laser engraver and cutter for personalisation.

Discover laser engravers and cutters

Questions about applications or settings?
We're happy to advise you from A for Air assist to Z for z-offset.

Contact us
Proud member of troGROUP Logo