--------------------------

Personalized Christmas decoration

Step by step guide

Produce a valuable, personalized Christmas decoration for your customers from 3 inexpensive materials.
With a few adjustments, you can use the design for a wide variety of items. 

Preparation

Required material
  • red polyesterfelt, approx. 4mm
  • white Alcantara leather
  • green wool, approx. 2 mm thick
Machine used
This sample can also be made on any machine from the Speedy series. Tip: We recommend the use of 100% polyester felt as it is especially suited for processing with the laser.
Christmas Boot Felt Design

PDF

Download now
Christmas Boot Design LaserLeather

PDF

Download now
Christmas decoration parameters

ZIP

Download now

Step by step

Step 1

Design

Import our template and adapt it to your requirements.

With "Create job" move the design to the "Prepare" screen. 

Step 2

Laser process

Place the job to the desired position and adapt the settings. Add or update the text in the "Design" screen of Ruby®.

The laser parameters may vary depending on the type of laser machine and available laser power. Send the job to the "Queue" for Laser processing.

Inner geometries first: On 
Skip overlapping cut lines: Off

Felt:

Effect Engrave Quality
Process Engrave
Layers black
Power (%) 45
Speed (%) 50
DPI 500
Source CO2
Air Assist On
Z-offset -
Passes 1
Power Correction -
Direction Top down
Dithering Ordered 
Engraving Mode Standard
High Quality
Effect Cut Quality
Process Cut
Layers red
Power (%) 30
Speed (%) 1
Hz 1000
Source CO2 
Air Assist On
Z-offset -
Passes 1
Power Correction 20
Direction Bottom up
Dithering Ordered
Engraving Mode Standard
High Quality

LaserLeather:

Effect Engrave Quality
Process Engrave
Layers black
Power (%) 20
Speed (%) 50
DPI 500
Source CO2
Air Assist On
Z-offset -
Passes 1
Power Correction 20
Direction Bottom up
Dithering Ordered 
Engraving Mode Standard
High Quality
Effect Cut Quality
Process Cut
Layers red
Power (%) 20
Speed (%) 1.7
Hz 1000
Source CO2 
Air Assist On
Z-offset -
Passes 1
Power Correction 10
Step 3

Finishing

Place the parts for boot and brim on top of each other. Now you only need a slightly thicker wool thread to sew the individual parts together.

Inspiration

You can easily produce the boots in advance and customize them with the names when needed. 

Speedy series
The ideal laser engraver and cutter for personalisation.

Discover laser engravers and cutters

Questions about applications or settings?
We're happy to advise you from A for Air assist to Z for z-offset.

Contact us
Proud member of troGROUP Logo