Laser Cut Easter Decoration Using Acrylics | Trotec Laser

Looking for some inspiration for your Easter Decor? Take a look at our simple tutorial on how to create your own decor using laser paper and some acrylics. Download your graphic templates and instructions here.

Laser cut acrylic TroGlass Satins


Machine used
  • Speedy 360
  • 80 watts
  • 2" lens
  • Aluminum Cutting Grid Table or Honeycomb Cutting Tabletop for LaserPaper
  • Acrylic gutting grid for TroGlass Satins

This sample can be made on any machine from the Speedy laser engraver series.


Download now

Step by Step

Step 1

Step 1: Upload Your Design

Start by uploading our provided design and adapt it as you need. Next, send the job to the to the laser using the driver settings below.


Place the sheet in 0/0 position and place the job to the same position on the plate in JobControl. Due to the size the paper will not be cut.

Print settings:

Process mode: Resolution: Cut line:
Standard 500dpi none
Halftone: Others:
Color -
Step 2

Step 2: Process the LaserPaper

Remember, your laser parameters could vary depending on the type of laser machine and on the laser power you have available.

Laser Parameter Color Process Power (%)  Speed (%)  ppi/Hz
 Engraving  black  Engrave CO2  60 100 500
 Positioning  blue  Positioning  -  -  -
Passes Air Assist Z-Offset Direction Advanced
1 ON 3 top down -
- - - - -
Step 3

Step 3: TroGlass Satins

Send the job for the three individual TroGlass colours to the laser by making use of the below listed driver settings.

Print settings:

Process mode Resolution Cut lin
Standard 500dpi none
Halftone Others
Color enhanced geometries
Step 4

Step 4: Laser process TroGlass Satins

The laser parameters may vary depending on the type of laser machine and available laser power.

Laser Parameters: Cutting

Color Process Power (%) Speed (%) ppi/Hz
red Cut CO2 50 0,2 5000
Passes: Air Assist Z-Offset Direction Advanced
1 ON - - -
Step 5

Step 5: Assembly

Start by placing the LaserPaper into the picture frame you selected. Next place the acrylic circles onto the engraved ones on the paper. Place them in order from smallest to smallest and so on. Carefully align each of them to the center.


To improve the stability while working with the picture, we placed a thin plasitc sheet behind the LaserPaper. And now you're finished with this colourful easter decoration! Sit back and admire your work.

Why should I use Trotec materials?

Benefit from our laser-friendly paper and our versatile acrylic glass plates, which are especially suitable for the laser process.
Our wide TroGlass range is available in numerous colours and with different surfaces or degrees of transparency. The LaserPaper used consists of a real wood surface with a white cardboard on the back and enables extraordinary results in printing, cutting and engraving.


Use other colors or material combinations.

Speedy series
The ideal laser engraver and cutter for personalization.

Discover laser engravers and cutters

Questions about applications or settings?
We're happy to advise you from A for Air assist to Z for z-offset.

Request more
information now.