Speedy series: Laser engraving and cutting machines for formats up to 1016 x 610 mm
⚫ Engrave | ⚫ Cut | ⚫ Mark |
Laser type: | CO₂, Flexx or Fiber laser |
---|---|
Work area: | 610 x 305 up to 1016 x 610 mm |
Max. workpiece height: | 125 - 305 mm |
Laser power: | 20 - 120 watts |
SP series: CO2 laser cutter for large-format materials.
⚫ Engrave | ⚫ Cut | ⎯ Mark |
Laser type: | CO₂ laser |
---|---|
Work area: | 1245 x 710 up to 3250 x 3210 mm |
Max. workpiece height: | 50 - 112 mm |
Laser power: | 40 - 400 watts |
Marking laser stations with galvo marking heads. Marking area up to 44.1 x 25.0 inch.
⚫ Engrave | ⎯ Cut | ⚫ Mark |
Laser type: | CO₂ or Fiber laser |
---|---|
Max. work area: | 190 x 190 up to 1300 x 450 mm |
Max. workpiece height: | 250 - 764 mm |
Laser power: | 20 - 100 watts / 20 + 100 watts MOPA |
Available for
SP500 - Standard
SP1500 - Option
SP3000 - Option
An exhaust that is directly attached to the laser head removes dust and gases generated during the laser process. The travelling exhaust is indispensible for engraving applications. Dust is efficiently extracted where it is produced. This will improve the engraving result significantly when working with wood, laminates, or even acrylic.
Also during cutting, the travelling exhaust prevents accumulation of the generated gases on the surface of the cut material. Unaesthetic smoke residues around the cut and inflaming on the upper side of the material can thus be prevented.