Speedy series: Laser engraving and cutting machines for formats up to 1016 x 610 mm
⚫ Engrave | ⚫ Cut | ⚫ Mark |
Laser type: | CO₂, Flexx or Fiber laser |
---|---|
Work area: | 610 x 305 up to 1016 x 610 mm |
Max. workpiece height: | 125 - 305 mm |
Laser power: | 20 - 120 watts |
SP series: CO2 laser cutter for large-format materials.
⚫ Engrave | ⚫ Cut | ⎯ Mark |
Laser type: | CO₂ laser |
---|---|
Work area: | 1245 x 710 up to 3250 x 3210 mm |
Max. workpiece height: | 50 - 112 mm |
Laser power: | 40 - 400 watts |
Marking laser stations with galvo marking heads. Marking area up to 44.1 x 25.0 inch.
⚫ Engrave | ⎯ Cut | ⚫ Mark |
Laser type: | CO₂ or Fiber laser |
---|---|
Max. work area: | 190 x 190 up to 1300 x 450 mm |
Max. workpiece height: | 250 - 764 mm |
Laser power: | 20 - 100 watts / 20 + 100 watts MOPA |
With a working area 3,250 x 3,210 mm and a maximum roll width of 3,200 mm, the SP4000 is a fully automated laser system dedicated for soft signage applications such as banners, flags, or light boxes. By combining an automated solution with high cutting speeds and convincing accuracy, high production volumes with perfect quality are achieved in a highly reliable and efficient finishing process. The large format laser can be flexibly configured around a conveyor belt with feeder unit and unloading table – depending on the desired workflow. All components are perfectly matched.
The laser beam melts the material while cutting and this results in clean, perfectly sealed edges with no fraying. Another advantage: thanks to the contactless and tool-free process, even elastic material can be cut distortion-free and reliably.
Unlike many other machines on the market, the SP series does not carry the laser source on the working head or on the axis. This would limit the movement system in its cutting speed as well as the laser power significantly. The Trotec R&D team focused on maximizing the performance: The laser source is installed stationary in the body of the machine, the laser beam is carried to the material via mirrors over the entire working area. Since the laser source is fixed, there are no restrictions on the installed laser power. This is a crucial productivity advantage: For typical soft signage applications, we propose a laser power of 200 watts to achieve maximum productivity.