Speedy series: Laser engraving and cutting machines for formats up to 1016 x 610 mm
⚫ Engrave | ⚫ Cut | ⚫ Mark |
Laser type: | CO₂, Flexx or Fiber laser |
---|---|
Work area: | 610 x 305 up to 1016 x 610 mm |
Max. workpiece height: | 125 - 305 mm |
Laser power: | 20 - 120 watts |
SP series: CO2 laser cutter for large-format materials.
⚫ Engrave | ⚫ Cut | ⎯ Mark |
Laser type: | CO₂ laser |
---|---|
Work area: | 1245 x 710 up to 3250 x 3210 mm |
Max. workpiece height: | 50 - 112 mm |
Laser power: | 40 - 400 watts |
Marking laser stations with galvo marking heads. Marking area up to 44.1 x 25.0 inch.
⚫ Engrave | ⎯ Cut | ⚫ Mark |
Laser type: | CO₂ or Fiber laser |
---|---|
Max. work area: | 190 x 190 up to 1300 x 450 mm |
Max. workpiece height: | 250 - 764 mm |
Laser power: | 20 - 100 watts / 20 + 100 watts MOPA |
When a standard laser workstation cannot meet the needs of your laser marking requirements, our experts at Trotec Laser Automation are the correct point of contact. They guide you in three steps from the evaluation phase up to the installation and implementation of the special laser machine.
Here you can find an overview of realised projects.
First we take a look at the customers` requirements, needs and expectations. Then we analyze following:
Based on the requirements, we provide a performance and specification sheet and a draft of the laser machine. Our experts additionally offer an alternative design in order to find the best possible solution.
From the first day on, we emphasize tight cooperation with the customer. After a detailed kick-off meeting, we have regular meetings to be sure that the project meets the customers` requirements. At the end of the project, the machine will be installed together with the customer.
You need a special laser machine for your laser marking, laser engraving or laser cutting process?
Our experts of Trotec Laser Automation are pleased to inform you about your possibilities.