With Trotec laser machines, you can laser-cut, engrave or mark many materials, including: plastics, wood, rubber, leather, metals, textiles and many others. In the table below, you can see details about the material processing capabilities of our laser engraving and laser cutting machines. The list of materials is structured according to processing type (cutting, engraving, marking).
|Metal foils up to 0.5mm |
(Aluminum, Brass, Copper, precious metal)
|Acrylonitrile butadiene styrene (ABS)||⚫||⚫||⚫|
|Acrylic/PMMA, i.e. Plexiglas®||⚫||⚫||⚫|
|Polybutylene terephthalate (PBT)||⚫||⚫||⚫|
|Polyethylene terephthalate (PET)||⚫||⚫||⚫|
|Polyoxymethylene (POM) -i.e. Delrin®||⚫||⚫||⚫|
|Polyphenylene sulfide (PPS)||⚫||⚫||⚫|
|Foam (PVC free)||⚫||⚫||⚫|
* List of materials are based on a Trotec flexx laser. Flexx lasers combine a CO2 and a fiber laser source in one machine.
For more details on the cutting, marking and engraving capabilities of our CO2 lasers or a fiber lasers, see this reference sheet.
Are you looking for information on a material that was not on the list? Please contact us. We will be happy to check if your material is suitable for laser cutting or laser engraving.