Speedy series: Laser engraving and cutting machines for formats up to 1016 x 610 mm
⚫ Engrave | ⚫ Cut | ⚫ Mark |
Laser type: | CO₂, Flexx or Fiber laser |
---|---|
Work area: | 610 x 305 up to 1016 x 610 mm |
Max. workpiece height: | 125 - 305 mm |
Laser power: | 20 - 120 watts |
SP series: CO2 laser cutter for large-format materials.
⚫ Engrave | ⚫ Cut | ⎯ Mark |
Laser type: | CO₂ laser |
---|---|
Work area: | 1245 x 710 up to 3250 x 3210 mm |
Max. workpiece height: | 50 - 112 mm |
Laser power: | 40 - 400 watts |
Marking laser stations with galvo marking heads. Marking area up to 44.1 x 25.0 inch.
⚫ Engrave | ⎯ Cut | ⚫ Mark |
Laser type: | CO₂ or Fiber laser |
---|---|
Max. work area: | 190 x 190 up to 1300 x 450 mm |
Max. workpiece height: | 250 - 764 mm |
Laser power: | 20 - 100 watts / 20 + 100 watts MOPA |
Use our template and instructions to make this creative desk pen holder.
We used engraving materials available at Trotec. (Browse product range: www.trotec-materials.com.)
For this sample you can use any laser machine from the Speedy laser engraver series.
Check the thickness of the material before you start and adapt the kerf if necessary.
Make your own design or use our template. (You can also adjust our template to meet your requirements.)
You can adapt the diameter of the holes depending on the pens you want to insert.
Send the job to the laser using the following print settings:
Process mode | Resolution | Cut line |
---|---|---|
Standard | 500 dpi | none |
Halftone | Others |
---|---|
color | enhanced geometries, inner geometries first |
Adjust the parameter settings in your laser software. The suggested parameters can differ depending on the machine used and the laser power:
Color | Process | Power (%) | Speed (%) | ppi/Hz |
---|---|---|---|---|
Creasing: red | cut CO2 | 7 | 1 | 1000 |
Cutting: red | cut CO2 | 100 | 1.6 | 1000 |
Passes | Air Assist | Z-Offset | Advanced |
---|---|---|---|
1 | on | - | - |
1 | on | - | - |
We used the standard parameters from JobControl® for 5 mm solid maple.
Remove the wood from the laser and clean it with a damp cloth. To assemble it, simply put together the two parts.
Now this desk accessory is ready to be sold to your customers and filled with pens or business cards.