Speedy series: Laser engraving and cutting machines for formats up to 1016 x 610 mm
⚫ Engrave | ⚫ Cut | ⚫ Mark |
Laser type: | CO₂, Flexx or Fiber laser |
---|---|
Work area: | 610 x 305 up to 1016 x 610 mm |
Max. workpiece height: | 125 - 305 mm |
Laser power: | 20 - 120 watts |
SP series: CO2 laser cutter for large-format materials.
⚫ Engrave | ⚫ Cut | ⎯ Mark |
Laser type: | CO₂ laser |
---|---|
Work area: | 1245 x 710 up to 3250 x 3210 mm |
Max. workpiece height: | 50 - 112 mm |
Laser power: | 40 - 400 watts |
Marking laser stations with galvo marking heads. Marking area up to 44.1 x 25.0 inch.
⚫ Engrave | ⎯ Cut | ⚫ Mark |
Laser type: | CO₂ or Fiber laser |
---|---|
Max. work area: | 190 x 190 up to 1300 x 450 mm |
Max. workpiece height: | 250 - 764 mm |
Laser power: | 20 - 100 watts / 20 + 100 watts MOPA |
Create your own wedding invitation using LaserPaper and your laser
Create your own unique and intricate wedding invitation using Trotec's LaserPaper colours range. This product is specifically designed for laser processing and can be used for various designs like greeting cards, name tags and even paper gift boxes.
All materials can be ordered from our engraving supplies webshop.
Any Speedy-series laser engraver can be used to make this sample.
We suggest using two contrasting colours for your design. Darker colours will naturally bring out the visual impact of the finished engraving results. Use a 1.5" lens for detailed cuts.
Create your own design or use our template for the wedding invitation. Send the two graphics to your Trotec laser with the following settings.
Process Mode | Resolution | Cut line |
---|---|---|
Standard | 500 dpi | None |
Halftone | Others |
---|---|
Color | Optimized geometries, inner geometries first |
Gently place your paper sheets in your Trotec Laser. Be sure to cover the rest of the working surface with a flat substrate, like plain paper. This will help to create a strong vacuum and will stop the rest of the material from shifting slightly. Take note that the parameters are likely to vary between laser machines and the power available.
Color | Process | Power | Speed | ppi/Hz |
---|---|---|---|---|
black | engrave | 30 | 80 | 500 |
red | cut | 25 | 2.5 | 2000 |
blue | engrave | 20 | 80 | 1000 |
Passes | Air assist | Z-Offset | Advanced |
---|---|---|---|
1 | ON | 0 | Custom |
1 | ON | 0 | Default |
1 | OFF | 0 | Custom |
In this tutorial we made use of standard laser parameters that had been adjusted slightly. We always advise that you test your setting and adjust them accordinly depending on your laser and the power available. The material parameters of JobControl can be downloaded from www.troteclaser.com
Take the blue engraved LaserPaper, fold along the scored edges, and stick the red LaserPaper into the center.
Trotec LaserPaper is perfect for all types of invitations. In our range of laser and engraving materials you will find a wide range of many different colours which are perfect for invitation cards, table decorations and greeting cards.
Be sure to test out different colours of LaserPaper to make your designs truly unique.