LaserPaper Valentine's card

Full instructions

See how you can create an individual Valentine's day card using Trotec's New LaserPaper for engraving.

Required material:

Machine used:

  • Speedy 360, 80 Watt
  • 1.5" lens
  • Vacuum table and honeycomb cutting table

For this sample you can use any laser machine from the Speedy laser engraver series.


Use the 1.5 inch lens if you want to make intricate cutting designs like in our template

Step by Step

Step 1: Import design

Create your own design or import our template. Send the job to the laser using the driver settings thatb follow.

Print settings:

Process mode Resolution Cut line
Standard 500 dpi none
Halftone Others


The small circles in heard shape are a perforation which helps you to remove the heart. You can use the heart for other purposes.

Step 2: Engraving the Paper

To make the material parameter settings, we used several parameters which have been optimized for the different requirements (fast and slow cutting, light and deep engraving, scratching). The parameters may vary depending on the laser machine used and laser power set.

Laser parameters:

Color Process Power (%) Speed (%) ppi/Hz
black Engrave CO2 17 20 500
red Engrave CO2 25 20 500
blue Cut CO2 12 1 1000
cyan Cut CO2 5 1 1000
green Cut CO2 24 2 1000
Passes Air Assist Z-OFfset Advanced
1 on +3 mm High quality
1 on - High quality
1 on - -
1 on +4 mm -
1 on - -


Cover the rest of the engraving area carefully to achieve full vacuum which holds the paper in place.

Step 3: Cleaning

Dust particles can be removed with a damp or wet cloth if necessary. Ensure that the cloth is not wet to avoid arching of the paper.


  • Combine different colors from the Trotec LaserPaper product range and create a large range of variations.
  • The LaserPaper Wood can also be used to print and cut with your laser system using JobControl® Vision.

Trotec Product Recommendations

See our lasers in action! Request a demo now
Request a demo now