Speedy series: Laser engraving and cutting machines for formats up to 1016 x 610 mm
⚫ Engrave | ⚫ Cut | ⚫ Mark |
Laser type: | CO₂, Flexx or Fiber laser |
---|---|
Work area: | 610 x 305 up to 1016 x 610 mm |
Max. workpiece height: | 125 - 305 mm |
Laser power: | 20 - 120 watts |
SP series: CO2 laser cutter for large-format materials.
⚫ Engrave | ⚫ Cut | ⎯ Mark |
Laser type: | CO₂ laser |
---|---|
Work area: | 1245 x 710 up to 3250 x 3210 mm |
Max. workpiece height: | 50 - 112 mm |
Laser power: | 40 - 400 watts |
Marking laser stations with galvo marking heads. Marking area up to 44.1 x 25.0 inch.
⚫ Engrave | ⎯ Cut | ⚫ Mark |
Laser type: | CO₂ or Fiber laser |
---|---|
Max. work area: | 190 x 190 up to 1300 x 450 mm |
Max. workpiece height: | 250 - 764 mm |
Laser power: | 20 - 100 watts / 20 + 100 watts MOPA |
Watch how created our own laser cut puzzle for this month's featured application. Download our free files or create your own unique puzzle, and follow our recommendations below.
Subscribe to our YouTube channel for more application tutorials, processing tips, webinars, and testimonials. Don't miss our Third Thursday virtual workshops and our new "Can You Laser It?" YouTube series!
You can also use Trotec's solid wood panels, or your own preferred material.
You can also use any other laser in our Speedy laser engraver series to create this application.
Import the downloaded file into your preferred graphic software and send the job to the laser with the following settings:
Process mode | Resolution | Cut line |
---|---|---|
Standard | 500 dpi | none |
Halftone | Others |
---|---|
Color | enhanced geometries, inner geometries first |
Load your Trotec veneered wood or preferred material into the laser bed, focus, and start the cutting process.
Color | Process | Power (%) | Speed (%) | Ppi/Hz |
---|---|---|---|---|
Red | Cut CO2 | 100 | 1.2 | 1000 |
Passes | Air Assist | Z-Offset | Direction | Advanced |
---|---|---|---|---|
1 | ON | - | - | - |
Keep in mind that these settings are for a 120W laser, so you may need to adjust your parameters based on the wattage of your laser machine: how to find the best parameters for your laser
Remove the laser cut parts from the bed and adhere the bottom puzzle base to the top puzzle layer without the puzzle pieces. Use your preferred type of wood glue and clamp until dry. Now it's time to play!