TroCraft Eco material is ideally suited to model making. Put it to the test by following the instructions to build this little rocking chair model.
- 1 sheet of TroCraft Eco 1.0mm
- Cover material
- The NEW Speedy 400, 120 watts
- 2" lens
- Aluminum cutting grid table
Only the latest generation Speedy 400 laser engraver can use the cutting parameters for this application.
Import our graphics and adapt them to suit your needs. Send the graphics to your Trotec laser using the following settings:
|Process mode||Resolution||Cut line|
|Standard Job||500 dpi||none|
|Color||Optimized geometries, inner geometries first|
The TroCraft Eco sheet musst be placed into the new Trotec Speedy 400 and cover the remaining engraving area. The new OptiMotion™ path planning function, will automatically change the cutting speed to the geometry being cut. The laser machine being used and the available laser power will determine the parameters:
|Laser process||Color||Process||Power (%)||Speed (%)||ppi/Hz|
|Passes||Air ASsist||Z-offset||Direction||Path planning||Advanced|
|1||ON||0mm||Top Down||-||High Quality|
The new OptiMotion™ function on the Speedy 400 makes it very easy to determine cutting parameters. A simple long straight line will define the right speed at 100% power. If the parameter cuts through at the selected speed, you can adopt this setting for any cutting application on this material - whether large, angular shapes or detailed, small circular geometries. Make sure, however, that the frequency is adjusted accordingly at high speeds (e.g. to 2000Hz or 3000Hz) to obtain a uniform cutting line.
By putting the three parts of the rocking chair together, the model rocking chair is now ready.
TroCraft Eco is an environmentally-friendly wood sheet which is produced without using additives. It is fully biodegradable and emission-free. TroCraft Eco is made from pure cellulose fibre and is suitable for use in custom, modern designs due to its stability, flexibility and durable formability. It is perfect for interior design, sustainable toys, model making or product and industrial design.
Try designing a complete interior for a doll house. Combine thicker TroCraft boards for statically stressed furniture.