businesscard card leather engraved

Leather Businesscard Holder

Request a demo

Make individual business card holder made out of natural leather.


Required material:

  • Leather (approx. 2 mm thick)
  • Adhesive tape

Machine used:

  • Trotec Speedy 100
  • 25 Watt
  • 1,5" lens
  • honeycomb cutting table

Step by Step

Step 1: Import /create design template

Design your business card holder or import one of our three designs into your graphic program and adapt it according to your requirements. The three designs provided differ in terms of shape, folding technique and surface design.

Step 2: Laser process

Send the laser job to the machine.

Laser Parameters:

Engraving (black): power 80 %, speed 50%, 500 dpi, 2 passes, air assist on
Scoring (red): power 20 %, speed 2%, 2000 Hz, 2 passes, air assist on, z-offset 2 mm
Cutting (blue): power 35 %, speed 0,7%, 1000 Hz, air assist on
Cutting (green): power 66 %, speed 1,8%, 1000 Hz, air assist on


Using the z-offset defocuses the laser beam and the cut lines appear thicker than working in focus.

Step 3: Post-processing

As you can see in the graphic, we cut little holes with a diameter of 1 mm along the outer edges in two of the three designs. This allows you to quickly finish the purses. Just use a thicker, tear-resistant thread and start sewing (without having to punch the holes into the leather).


Leather is a natural product what tends to burn during engraving or cutting. And it produces a particular smell. Furthermore, the cutting edges can turn dark and stain. Many types of leather can easily be cleaned. However, it is important to test the cleaning method at a discreet place. First off, try to remove the smoke residues with a dry cloth. should there still be residues, the leather can be cleaned with a damp cloth or with an alcohol-based cleaner.

Check out the Trotec Speedy series

Laser Engravers - Speedy Series

laser etcher speedy

Speedy series: Laser engraving and cutting machines for formats up to 1016 x 610 mm

Laser type: CO₂, Fiber or Flexx laser
Work area: 610 x 305 up to 1016 x 610 mm
Max. workpiece height: 125 - 305 mm
Laser power: 10 - 120 watts
Engrave Cut Mark

Laser Cutters - SP Series

laser cutter design award

SP series: CO2 laser cutter for large-format materials.

Laser type: CO₂ laser
Work area: 1245 x 710 up to 3250 x 3210 mm
Max. workpiece height: 50 - 112 mm
Laser power: 40 - 400 watts
Engrave Cut Mark

Marking Lasers - SpeedMarker

speedmarker laser marking system

Marking laser stations with galvo marking heads. Marking area up to 44.1 x 25.0 inch.

Laser type: CO₂ or Fiber laser
Max. work area: 190 x 190 up to 1300 x 450 mm
Max. workpiece height: 250 - 764 mm
Laser power: 20 - 100 watts / 20 + 100 watts MOPA
Engrave Cut Mark

GS Series

automated laser cutter GS12

Laser system for high-speed laser cutting and high volume paper finishing

Laser type:
Work area: 0 x 0 mm
Max. workpiece height: 0 - 0 mm
Laser power: 99999 - 0 watts
Engrave Cut Mark


laser engraver for stamp production

Laserati: For high-volume stamp producers, for highest productivity and best engraving quality

Laser type: CO₂ laser
Work area: 840 x 300 mm
Max. workpiece height: 0 - 0 mm
Laser power: 105 - 180 watts
Engrave Cut Mark

Speed Cutter Twin - Stent Laser

stent laser cutting machine

SpeedCutter: Unique stent cutting laser with a choice of either 1 or 2 fiber laser heads (fiber or femtosecond laser) as well as...

Laser type:
Work area: 0 x 0 mm
Max. workpiece height: 0 - 0 mm
Laser power: 99999 - 0 watts
Engrave Cut Mark