We used the 1.5" lens because we wanted to engrave a plan with many details. For design with less details, use the 2" lens.
Step by Step
Step 1: Import design
Create your own design or import our template. Send the job to the laser using the driver settings below.
Print driver settings
Process mode
Resolution
Cut line
Standard
500 dpi
none
Halftone
Others
Color
Step 2: Laser engraving the brick
Place the brick into your Trotec laser engraving machine and focus on the surface of the material. Create the material parameter settings. The parameters can differ depending on the laser machine and available laser power.
Laser Parameters engraving
Color
Process
Power (%)
Speed (%)
ppi/Hz
black
engrave CO2
100
30
500
Passes
Air Assist
Z-Offset
Advanced
1
on
+1 mm
high quality
Step 3: Cleaning
Use a wet or damp sponge to clean the surface and bind the dust. - This personalised and original gift is ready to be sold.
