laser-engraved-door-mat

Laser engraving a door mat

Customise standard door mats with your Trotec laser and add additional value to this product quickly and simply.


Preparation

Material Required:

  • single-color door mat

Machine used:

  • Speedy 400, 120 watts
  • 4" lens
  • Vacuum table

Depending on the size of the door mat, you can use any other machine of the Speedy laser engraver series.

Tip:

Due to the coarse structure of the door mat, we used a lens with long focal distance to compensate the unevenness of the fabric.


Step by Step

Step 1: Import design

Create your own design or import our template.

Send the job to the laser using the driver settings below.

Print settings:

Process mode Resolution Cut line
Standard 333 dpi none
Halftone Others
Color -

Tip:

Since a door mat is typically viewed from the distance, you can use a lower resolution which reduces the production time. 


Step 2: Laser engraving the door mat

Place the door mat into your Trotec laser engraving machine. Create the parameter settings. The suggested settings will differ depending on the laser machine used and laser power.

Laser parameters engraving:

Color Process Power (%) Speed (%) ppi/Hz
black Engrave CO2 80 100 500
Passes Air Assist Z-Offset Advanced
1 ON 4mm -

Tip:

Since a door mat is typically viewed from the distance, a resolution of 333 dpi will suffice. 


Inspiration

  • Engrave company logos, sports clubs or other organizations and increase your customer base.
  • Private house builder slogans are perfect for individual promotional items.


Trotec Product Recommendations