Speedy series: Laser engraving and cutting machines for formats up to 1016 x 610 mm
⚫ Engrave | ⚫ Cut | ⚫ Mark |
Laser type: | CO₂, Flexx or Fiber laser |
---|---|
Work area: | 610 x 305 up to 1016 x 610 mm |
Max. workpiece height: | 125 - 305 mm |
Laser power: | 20 - 120 watts |
SP series: CO2 laser cutter for large-format materials.
⚫ Engrave | ⚫ Cut | ⎯ Mark |
Laser type: | CO₂ laser |
---|---|
Work area: | 1245 x 710 up to 3250 x 3210 mm |
Max. workpiece height: | 50 - 112 mm |
Laser power: | 40 - 400 watts |
Marking laser stations with galvo marking heads. Marking area up to 44.1 x 25.0 inch.
⚫ Engrave | ⎯ Cut | ⚫ Mark |
Laser type: | CO₂ or Fiber laser |
---|---|
Max. work area: | 190 x 190 up to 1300 x 450 mm |
Max. workpiece height: | 250 - 764 mm |
Laser power: | 20 - 100 watts / 20 + 100 watts MOPA |
Step by step guide
The first impression counts: Use a laser engraved box for your business cards. You can engrave the box with your company logo or personalize it with your name or motto.
We used a business card box out of anodized aluminium
Open the template file and send it to the laser. The laser parameters may vary, as they depend on the machine used and the available laser power.
Page 1 is the engraving for the outer surface of the box, page 2 shows the calendar and page 3 contains the jig.
Red: power 80 %, speed 0.60 %, frequency 5000 Hz, Air Assist on
Use the jig for a better positioning and start with the engraving.
Black: power 30 %, speed 30%, frequency 1000 ppi, Air Assist on