Let your imagination run wild and create your individual acrylic jewelry. Practically every design, that can be imagined, can be processed with the laser.
eyelets and hooks
Trotec laser used
2.0 inch lens
Dark coloured or radiant acrylics look very elegant
Use a 2.0 inch lens for a perfect cut
Step by Step
Step 1: Cut the jewelry
Create your own design or use our template. Send it to the laser with the recommended laser parameters. The parameters might vary depending on the machine used and the available laser power.
Used cutting parameters:
power 100%, speed 1.0%, frequency 5000 Hz, Air Assist on
Step 2: Cut and engrave the jewelry stand
You can also either create your own or use our template for the design of the jewelry stand. Be careful, the stand has to be high enough to carry a necklace and has to have a stable pillar.
Used engraving parameters: power 20%, speed 50%, 500 ppi, Air Assist on
Used cutting parameters: power 100%, speed 0,5%, frequency 1000 Hz, Air Assist on
Step 3: Assembly of the jewelry
Use eylets and hooks to attach the pieces on a necklace. There are special hooks for the earrings. You find such material in handicraft shops, on online platforms like Amazon or in special beading shops.