Speedy series: Laser engraving and cutting machines for formats up to 1016 x 610 mm
⚫ Engrave | ⚫ Cut | ⚫ Mark |
Laser type: | CO₂, Flexx or Fiber laser |
---|---|
Work area: | 610 x 305 up to 1016 x 610 mm |
Max. workpiece height: | 125 - 305 mm |
Laser power: | 20 - 120 watts |
SP series: CO2 laser cutter for large-format materials.
⚫ Engrave | ⚫ Cut | ⎯ Mark |
Laser type: | CO₂ laser |
---|---|
Work area: | 1245 x 710 up to 3250 x 3210 mm |
Max. workpiece height: | 50 - 112 mm |
Laser power: | 40 - 400 watts |
Marking laser stations with galvo marking heads. Marking area up to 44.1 x 25.0 inch.
⚫ Engrave | ⎯ Cut | ⚫ Mark |
Laser type: | CO₂ or Fiber laser |
---|---|
Max. work area: | 190 x 190 up to 1300 x 450 mm |
Max. workpiece height: | 250 - 764 mm |
Laser power: | 20 - 100 watts / 20 + 100 watts MOPA |
made using TroGlass Satins, a popular Trotec Acrylic
Looking for some inspiration for your Easter Decor? Take a look at our simple tutorial on how to create your own decor using laser paper and some acrylics. Download your graphic templates and instructions here.
This sample can be made on any machine from the Speedy laser engraver series.
Start by uploading our provided design and adapt it as you need. Next, send the job to the to the laser using the driver settings below.
Place the sheet in 0/0 position and place the job to the same position on the plate in JobControl. Due to the size the paper will not be cut.
Process mode: | Resolution: | Cut line: |
---|---|---|
Standard | 500dpi | none |
Halftone: | Others: |
---|---|
Color | - |
Remember, your laser parameters could vary depending on the type of laser machine and on the laser power you have available.
Laser Parameter | Color | Process | Power (%) | Speed (%) | ppi/Hz |
---|---|---|---|---|---|
Engraving | black | Engrave CO2 | 60 | 100 | 500 |
Positioning | blue | Positioning | - | - | - |
Passes | Air Assist | Z-Offset | Direction | Advanced |
---|---|---|---|---|
1 | ON | 3 | top down | - |
- | - | - | - | - |
Send the job for the three individual TroGlass colours to the laser by making use of the below listed driver settings.
Process mode | Resolution | Cut lin |
---|---|---|
Standard | 500dpi | none |
Halftone | Others |
---|---|
Color | enhanced geometries |
The laser parameters may vary depending on the type of laser machine and available laser power.
Color | Process | Power (%) | Speed (%) | ppi/Hz |
---|---|---|---|---|
red | Cut CO2 | 50 | 0,2 | 5000 |
Passes: | Air Assist | Z-Offset | Direction | Advanced |
---|---|---|---|---|
1 | ON | - | - | - |
Start by placing the LaserPaper into the picture frame you selected. Next place the acrylic circles onto the engraved ones on the paper. Place them in order from smallest to smallest and so on. Carefully align each of them to the center.
To improve the stability while working with the picture, we placed a thin plasitc sheet behind the LaserPaper. And now you're finished with this colourful easter decoration! Sit back and admire your work.
Benefit from our laser-friendly paper and our versatile acrylic glass plates, which are especially suitable for the laser process.
Our wide TroGlass range is available in numerous colours and with different surfaces or degrees of transparency. The LaserPaper used consists of a real wood surface with a white cardboard on the back and enables extraordinary results in printing, cutting and engraving.