Speedy series: laser engraving and cutting machines for formats up to 40 x 24 inches
⚫ Engrave | ⚫ Cut | ⚫ Mark |
Laser type: | CO₂, Flexx or Fiber laser |
---|---|
Work area: | 24.0 x 12.0 up to 40.0 x 24.0 inch |
Max. workpiece height: | 4.9 - 12.0 inch |
Laser power: | 20 - 120 watts |
SP series: CO2 laser cutter for large-format materials.
⚫ Engrave | ⚫ Cut | ⎯ Mark |
Laser type: | CO₂ laser |
---|---|
Work area: | 49.0 x 28.0 up to 128.0 x 126.4 inch |
Max. workpiece height: | 2.0 - 4.4 inch |
Laser power: | 40 - 400 watts |
Marking laser stations with galvo marking heads. Marking area up to 44.1 x 25.0 inch.
⚫ Engrave | ⎯ Cut | ⚫ Mark |
Laser type: | CO₂ or Fiber laser |
---|---|
Max. work area: | 7.5 x 7.5 up to 51.2 x 17.7 inch |
Max. workpiece height: | 9.8 - 30.1 inch |
Laser power: | 20 - 100 watts / 20 + 100 watts MOPA |
How to commission a SpeedMarker laser
Ideal for new laser operators, this quick guide shows you how to get started with the SpeedMarker marking laser. You will learn all the laser basics, starting with the commissioning, and get answers to important questions such as: Where is the laser rack? Where do you switch on the laser and the associated industrial PC? What is the function of the buttons on the laser?
The marking lasers from the SpeedMarker series are operated using the provided, pre-installed SpeedMark marking software. With this software, you can meet any marking requirement, including text, serial numbers, logos, codes (with both static and dynamic content). To perform a simple marking task, follow these steps:
And you have successfully marked the component. Within a very short time, you can use the intuitive software and perform your marking tasks.
This tutorial is a very helpful guide for companies with multiple, changing operators -- enabling employees who only occasionally work with the laser, as well as newly employed personnel, to operate the marking laser within a very short time. This saves time and money and increases the productivity of your company.