Speedy series: laser engraving and cutting machines for formats up to 40 x 24 inches
⚫ Engrave | ⚫ Cut | ⚫ Mark |
Laser type: | CO₂, Flexx or Fiber laser |
---|---|
Work area: | 24.0 x 12.0 up to 40.0 x 24.0 inch |
Max. workpiece height: | 4.9 - 12.0 inch |
Laser power: | 20 - 120 watts |
SP series: CO2 laser cutter for large-format materials.
⚫ Engrave | ⚫ Cut | ⎯ Mark |
Laser type: | CO₂ laser |
---|---|
Work area: | 49.0 x 28.0 up to 128.0 x 126.4 inch |
Max. workpiece height: | 2.0 - 4.4 inch |
Laser power: | 40 - 400 watts |
Marking laser stations with galvo marking heads. Marking area up to 44.1 x 25.0 inch.
⚫ Engrave | ⎯ Cut | ⚫ Mark |
Laser type: | CO₂ or Fiber laser |
---|---|
Max. work area: | 7.5 x 7.5 up to 51.2 x 17.7 inch |
Max. workpiece height: | 9.8 - 30.1 inch |
Laser power: | 20 - 100 watts / 20 + 100 watts MOPA |
Use our TroLase Metallic material to make an individual money gift.
Engraving materials are available at Trotec. Browse our product range at: www.trotec-materials.com
For this sample you can use any laser machine from the Speedy series.
Import our design into your graphic program. Personalise it according to your preferences and send it to your laser as a photo.
Process mode | Resolution | Cut line |
---|---|---|
Photo | 500 dpi | none |
Halftone | Others |
---|---|
Ordered Dithering | - |
Put the material into the laser machine. Make sure that it lies flat on the table. Fix the sheet on the table with paper tape if necessary.
Color | Process | Power (%) | Speed (%) | ppi/Hz |
---|---|---|---|---|
black | engrave CO2 | 50 | 80 | 500 |
red | cut CO2 | 60 | 1.2 | 5000 |
Passes | Air Assist | Z-Offset | Advanced |
---|---|---|---|
1 | on | +1 mm | High quality |
1 | on | - | - |
Pull the decorative band through the two laser-cut holes and put the engraved sign into the frame. Now fix the bank notes on the band. To finish this sample, decorate the frame as you like.