Creating impressive stamps from photos is easy with your laser engraver, capturing even the finest details of the image.
- laser rubber
- stamp, we used Trodat Professional 5215
Trotec laser used
- Speedy 100
- 60 watts
- Use a 1.5 inch or a 2.0 inch lens
If possible, use a high-contrast portrait photo with a light, even background. If you want to use pictures from Internet, always download large-scale images. Get a detailed guide how to prepare a photo for stamp engraving here.
Open the file "Photo stamp" (Download our sample file) and send it to the laser with the recommended laser settings. The settings will vary depending on the machine used and the available laser power.
Recommended engraving settings (black):
Power 100 %, Speed 18 %, 600 ppi
Recommended cutting settings (red):
Power 100 %, Speed 2,5 %, frequency 2000 Hz
As soon as the rubber sheet is engraved and cut, you can assemble the two parts per the stamp instructions.