Christmas village

During the Christmas period, the table where you are going to receive your guests is certainly one of the key elements for the Christmas celebration. In this tutorial, discover our village which will find its place at the center of your table to embellish and illuminate it.

paper house model laser cutting

Preparation

Required material

Paper 160gr in
- white
- green
- black

Glue

Trotec laser used
  • Speedy 360
  • 80 watts
  • 1.5 inch lens
paper-village-JC.zip

ZIP

Download now
paper-village.zip

ZIP

Download now

Step by step

paper model house laser cut
Step 1

Step 1: Your graphics

Import the “Christmas Village” file consisting of 6 tabs into your regular graphics software. Each tab will form your village: Houses, roofs, trees. We have used white for houses, black for roofs and green for trees. However, you can change these hues depending on the colors of your table, of course.

paper house laser settings
Step 2

Step 2: Parameters

We have used a Speedy 360 (80 W) for cutting 160-g paper. Place the paper into the machine, then use the following laser parameters:

Laser Settings

Kiss-cut: Power: 9% - Speed: 2% - Frequenzy: 1000 Hz -
Air Assist: ON - Z-Offset : 1.5
Cutting 1: Power: 9% - Speed: 2% - Frequency: 1000 Hz -
Air Assist: ON
Cutting 2: Power: 20% - Speed: 2% - Frequency: 1000 Hz -
Air Assist: ON

paper model houses laser cut
Step 3

Step 3: Assembling the pieces

Once the paper is cut, remove the various parts from the working table and assemble them. For building a house, fold and glue the walls, then add the roof. To create the trees, simply insert the two parts.

paper house laser cut
Step 4

Step 4: Tips & Tricks

  • For optimal and precise focusing, we have used the ultrasonic technology of the Speedy 360.
  • Use a black background to make the village shine
  • To illuminate the interior of houses, place a small LED candle inside
  • To make this setting magical, spray some artificial snow onto the rooftops once the village is set up… Effect guaranteed!

Speedy series
The ideal laser engraver and cutter for personalization.

Discover laser engravers and cutters

Questions about applications or settings?
We're happy to advise you from A for Air assist to Z for z-offset.

Contact us
Proud member of troGROUP Logo