Precious paper
Business cards

Impress your friends and colleagues with this individual paper finishing application. Precious paper laser engraved and cut.

paper business cards laser engraved

Preparation

Required material

Paper or cardboard, we used "Gmund Doubleface 925 brown, silver"

Trotec laser used
  • Speedy 300
  • 30 watts
  • 1.5 inch lens
paper-business-card-JC.zip

ZIP

Download now
paper business card
csm_paper-business-card_8d0abced2b.png

PDF

Download now

Step by step

business card box laser cut
Step 1

Step 1:

Open the file "Bussines_Card" in your graphic programme, then send it to the laser. Please keep in mind that the settings for speed and laser power may vary depending on the machine used.

Laser Settings

Black (engraving):
power: 30 %, speed: 25 %, frequency: 500 dpi, air assist: on 

Red (cutting):
power: 30 %, speed: 5 %, frequency: 1000 Hz, air assist: on, Z-Offset: -2

Blue (cutting):
power: 25 %, speed: 1.5 %, frequency: 1000 Hz, air assist: on

Desert blue (cutting):
power: 40 %, speed: 2 %, fequency: 1000 Hz, air assist: on

Step 2

Tips

  • Use the 1.5 inch lens. As a result, the detailed writings become particularly beautiful.
  • If you use conventional paper and not a special cardboard, our suggestion is to reduce the laser power.
  • The combination of the vacuum table and the honeycomb table leads to the best result.
  • Feel free to adapt the design! Be creative!

Speedy series
The ideal laser engraver and cutter for personalization.

Discover laser engravers and cutters

Questions about applications or settings?
We're happy to advise you from A for Air assist to Z for z-offset.

Contact us
Proud member of troGROUP Logo