Laser engraved brick

Find out how you can make an original present for home-builders using a simple clay brick.

diy-present-housewarming-party

Preparation

Required material
  • Clay brick from the DIY store
Machine used
  • Speedy 360, 100 Watt
  • 1.5" lens
  • Vacuum table

For this sample you can use any laser machine from the Speedy laser engraver series.

Tip

We used the 1.5" lens because we wanted to engrave a plan with many details. For design with less details, use the 2" lens.

Laser Engraved Brick

ZIP

Download now
Engraved Brick Parameters

ZIP

Download now

Step by Step

Step 1

Step 1: Import design

Make your own design or import our template. Send the job to the laser using the driver settings below.

Print driver settings

Process mode Resolution Cut line
Standard 500 dpi none
Halftone Others
Color  
Step 2

Step 2: Engraving the brick

Put the brick into your Trotec laser and focus on the surface of the material. Make the material parameter settings. The parameters can vary depending on laser machine and available laser power.

Laser Parameters engraving

Color Process Power (%) Speed (%) ppi/Hz
black engrave CO2 100 30 500
Passes Air Assist Z-Offset  Advanced
1 on +1 mm high quality
Step 3

Step 3: Cleaning

Use a wet sponge to clean the surface and bind the dust. - This original present is ready to be sold.

Inspiration

Individualize the bricks with names or dates.

Speedy series
The ideal laser engraver and cutter for personalization.

Discover laser engravers and cutters

Questions about applications or settings?
We're happy to advise you from A for Air assist to Z for z-offset.

Request more
information now.

Proud Member of troGROUP Logo