See our lasers in action!
Laser engraver and cutter
Speedy series: Laser engraving and cutting machines for formats up to 1016 x 610 mm
| ⚫ Engrave | ⚫ Cut | ⚫ Mark |
| Laser type: | CO₂, Flexx or Fiber laser |
|---|---|
| Work area: | 610 x 305 up to 1016 x 610 mm |
| Max. workpiece height: | 125 - 305 mm |
| Laser power: | 20 - 120 watts |
Large-format laser cutter
SP series: CO2 laser cutter for large-format materials.
| ⚫ Engrave | ⚫ Cut | ⎯ Mark |
| Laser type: | CO₂ laser |
|---|---|
| Work area: | 1245 x 710 up to 3250 x 3210 mm |
| Max. workpiece height: | 50 - 112 mm |
| Laser power: | 40 - 400 watts |
Industrial marking laser
Marking laser stations with galvo marking heads. Marking area up to 44.1 x 25.0 inch.
| ⚫ Engrave | ⎯ Cut | ⚫ Mark |
| Laser type: | CO₂ or Fiber laser |
|---|---|
| Max. work area: | 190 x 190 up to 1300 x 450 mm |
| Max. workpiece height: | 250 - 764 mm |
| Laser power: | 20 - 100 watts / 20 + 100 watts MOPA |
How to export laser parameters from JobControl®
Export files from JobControl® to save them to an external drive or use them on another workstation. JobControl® files comprise the laser parameters and are stored in XML format. (These can also be re-imported later.)
Step by Step
Opening the material database
- Open JobControl® on your computer
- Select "Settings" → “Material Template Setup Ctrl+M"
- The materials database opens
Exporting by clicking the gear icon
- Select “Material group"
- Click the gear icon
- Then select whether you want to export all materials or only one of them.
Now select the storage location, and you're done!
Importing files
Now you want to re-import the file on another PC? This guide describes the importing process step by step.
Further information
Need more help?
Contact the Trotec service hotline where top qualified and motivated laser experts will assist you with any questions or problems.
back to overview
X 
