Speedy series: Laser engraving and cutting machines for formats up to 1016 x 610 mm
⚫ Engrave | ⚫ Cut | ⚫ Mark |
Laser type: | CO₂, Flexx or Fiber laser |
---|---|
Work area: | 610 x 305 up to 1016 x 610 mm |
Max. workpiece height: | 125 - 305 mm |
Laser power: | 20 - 120 watts |
SP series: CO2 laser cutter for large-format materials.
⚫ Engrave | ⚫ Cut | ⎯ Mark |
Laser type: | CO₂ laser |
---|---|
Work area: | 1245 x 710 up to 3250 x 3210 mm |
Max. workpiece height: | 50 - 112 mm |
Laser power: | 40 - 400 watts |
Marking laser stations with galvo marking heads. Marking area up to 44.1 x 25.0 inch.
⚫ Engrave | ⎯ Cut | ⚫ Mark |
Laser type: | CO₂ or Fiber laser |
---|---|
Max. work area: | 190 x 190 up to 1300 x 450 mm |
Max. workpiece height: | 250 - 764 mm |
Laser power: | 20 - 100 watts / 20 + 100 watts MOPA |
When using TroLase materials and a Trotec laser, it is possible to make a wide range of different name tags. You can find out how to make these below.
Engraving materials are available at Trotec. Browse our product line at www.trotec-materials.com
For this sample you can use any laser machine from the Speedy laser engraver series.
See the complete production process in this video turorial:
Import our design template into your graphic program and adapt it according to your requirements.
Our template has been designed for 1.6mm material. If you are using other types of engraving materials, you will need to adapt the parameters.
Process mode | Resolution | Cut line |
---|---|---|
Standard | 500 dpi | none |
Halftone | Others |
---|---|
Color | enhanced geometries, inner geometries first |
Position the wood sheet into your laser and cover the rest of the table to maximize the exhaust power. Engrave and cut the various parts.
Color | Process | Power (%) | Speed (%) | ppi/Hz |
---|---|---|---|---|
red | cut CO2 | 40 | 0.7 | 1000 |
black | engrave CO2 | 35 | 60 | 500 |
Passes | Air Assist | Z-Offset | Advanced |
---|---|---|---|
1 | on | - | - |
1 | on | - | - |
As soon as all parts have been engraved and cut, you can assemble them using super glue. Finally, affix the magnet or pin on the back of the name tag. Now it's ready!
You can also use the parameters optimized for quality. This enhances the engraving result.