Speedy series: Laser engraving and cutting machines for formats up to 1016 x 610 mm
⚫ Engrave | ⚫ Cut | ⚫ Mark |
Laser type: | CO₂, Flexx or Fiber laser |
---|---|
Work area: | 610 x 305 up to 1016 x 610 mm |
Max. workpiece height: | 125 - 305 mm |
Laser power: | 20 - 120 watts |
SP series: CO2 laser cutter for large-format materials.
⚫ Engrave | ⚫ Cut | ⎯ Mark |
Laser type: | CO₂ laser |
---|---|
Work area: | 1245 x 710 up to 3250 x 3210 mm |
Max. workpiece height: | 50 - 112 mm |
Laser power: | 40 - 400 watts |
Marking laser stations with galvo marking heads. Marking area up to 44.1 x 25.0 inch.
⚫ Engrave | ⎯ Cut | ⚫ Mark |
Laser type: | CO₂ or Fiber laser |
---|---|
Max. work area: | 190 x 190 up to 1300 x 450 mm |
Max. workpiece height: | 250 - 764 mm |
Laser power: | 20 - 100 watts / 20 + 100 watts MOPA |
Step by step guide
Construct A Truck USA, a Trotec customer, is a unique and creative, family-owned company based in Michigan. Their vision: A smaller kind of car company with a big idea: Let youngsters build their own model truck on an assembly line! And in that spirit, they shared with us a small ornament that can be glued together for your tree.
Power: 100% - Speed: 50% - Frequency: 500 ppi - Air Assist: ON
Power: 100% - Speed: 2.10% - Frequency: 2500 Hz - Air Assist: ON
1. Glue the three body pieces together first.
2. Attach the wheels with the screws. Alternatively, if you don’t want the wheels to rotate, you can just glue them on as well.
3. Glue the fender pieces on ensuring that they don't rub against the wheels.
4. Tie a ribbon through the top hole and hang up.