In only a few steps you can make this fridge magnet made out of veneer wood.
- 1 sheet wood veneer oak 3 mm
- magnet foil approx. 20 x 35 mm or round magnet
- Speedy 360, 80 watts
- 2" lens
- Nozzle with small hole
- Honeycomb cutting tabletop
For this application sample you can use any laser machine from the Speedy series.
Create your own design or use our template. Send it to the laser with the recommended laser parameters given.
|Process mode||Resolution||Cut line|
|Color||enhanced geometries, inner geometries first|
Place the material on the honeycomb cutting table in your laser and cover the rest of the work area to create a stronger vacuum. The parameters can differ depending on the laser machine used and laser power available.
Position the veneer sheet onto the honeycomb cutting tabletop and cover the remaining work area to produce a bigger vacuum.
|Process||Color||Process||Power (%)||Speed (%)||Ppi/Hz|
|1||ON||6 mm||Top down||HQ|
|1||ON||1 mm||Top down||HQ|
|1||ON||3 mm||Top down||HQ|
Discover our varnished oak veneer panel, which we recommend especially for laser processing. The veneered oak panel can be used for a variety of applications, such as signs, gifts but also for architectural models and handicrafts. Test different laser settings or different types of wood - you can create a variety of different guitar models!