The next step is to determine parameter settings. Our suggested parameters vary depending on the laser machine used and the available laser power. In order to prevent early drying of the kitchen paper, we recommend deactivating the vacuum table blower during the engraving process.
Position the lantern on the vacuum table. Place a sheet of paper under the glass to prevent scratches on the glass. For an optimal engraving result, the surface to be engraved must have an even height. If the wind light has a beveled shape, you can compensate for any differences in height.
|Color ||Process ||Power (%) ||Speed (%) ||ppi/Hz |
|black ||Engrave CO2 ||90 ||100 ||500 ppi |
|Passes ||Air Assist ||Z-Offset ||Direction ||Advanced |
|1 ||Off ||- ||Top down ||- |