Lasercut and engraved
Cardboard Chair

cardboard furniture laser cutting

Preparation

Required material
  • 2 pieces of
    2mm corrugated cardboard
Trotec laser used
  • Speedy 300
  • 30 watts
  • 1.5 inch lens
Cardboard Chair

ZIP

Download now
csm_Paper-chair_29c1399615.png

PDF

Download now

Step by step

chair laser cut from cardboard
Step 1

Step 1: Preparation

Use the vacuum table with the honeycomb tabletop for cutting and engraving the cardboard.

chair made from cardboard laser
Step 2

Step 2: Development

Print the first page of the PDF document (the engraving layout) in size of 610 x 300mm. Adjust the marker to the job and engrave it.
After the engraving part you have to turn around the cardboard horizontally and cut the cardboard (cutting file on the second page of the PDF document).
Then place the second cardboard sheet for cutting of the cross-brace elements in the laser. These are on the third page of the PDF document.

cardboard furniture laser cutting
Step 3

Step 3: Used Laser Settings

Import the PDF file into Corel Draw, customize it as you want to or take your own design and send it to the laser.

Laser Settings

Front of the first cardboard
Engraving: Power: 40% - Speed: 100% - Frequency: 500 ppi - Air Assist: OFF - Z-Offset: 6mm
 
Back of the first cardboard
Cutting-in: Power: 7% - Speed: 3% - Frequency: 1000 Hz - Air Assist: OFF - Z-Offset: 6mm
Cutting: Power: 10% - Speed: 1% - Frequency: 1000 Hz - Air Assist: ON
 
Second cardboard
Cutting: Power: 20% - Speed: 1% - Frequency: 1000 Hz - Air Assist: ON

cardboard chair laser cutting
Step 4

Step 4: Assembly

For the assembly have a look at the installation instructions.

cardboard chair laser cut
Step 5

Step 5: Use

Now you can use your cardboard chair for everything you want.
Make it in another scale - then you can sit on it yourself because it is so stable.
Visit kurtl.com and have a look at a range of creative furniture out of cardboard.

Step 6

Tips:

Use the vacuum table with the honeycumb tabletop for cutting and engraving the cardboard. You have to engrave the front of the cardboard and cut it on the back. That's why you have to turn it around after engraving and cut it on the other side.

Speedy series
The ideal laser engraver and cutter for personalization.

Discover laser engravers and cutters

Questions about applications or settings?
We're happy to advise you from A for Air assist to Z for z-offset.

Contact us
Proud member of troGROUP Logo