Assemble paper wedding invitation

LaserPaper Wedding Invitation

Request a demo

Design and laser your own customised wedding invitations using the wide variety of colours on offer in the LaserPaper range. You can use the same techniques to make your own party invitations, cards, thank you notes and more.


Preparation

Required materials

  • 1 sheet LaserPaper Colors - Blue
  • 1 sheet LaserPaper Colors - Cottage Red with self adhesive backing

All materials can be ordered from our engraving supplies online store.

Machine used:

  • Speedy 100 60 Watts with a 1.5" lens.

You can use any Speedy-series laser engraver to make this sample.

Tips:

Change it up by using two contrasting colours for this project. Darker colours will enhance the visual impact of the finished engraving results. We suggest a 1.5" lens for detailed cuts.


Step by Step

Step 1: Design

Unleash your creativity and design your very own artwork, or use the template for this design. Simply send the inidivdual files to your Trotec laser with the following suggested settings.

Process Mode Resolution Cut line
Standard 500 dpi None
Halftone Others
Color Optimized geometries,
inner geometries first

Step 2: Laser cutting and laser engraving the LaserPaper

Load the LaserPaper into the laser, and use paper to cover any open space on the bed to increase the vacuum. This will offer better cutting results. Adjust the laser parameters depending on your laser and the laser power.

Laser Parameters:

Color Process Power Speed ppi/Hz
black engrave 30 80 500
red cut 25 2.5 2000
blue engrave 20 80 1000
Passes Air assist Z-Offset Advanced
1 ON 0 Custom
1 ON 0 Default
1 OFF 0 Custom

Tip:

You may wish to edit the standard laser parameters from JobControl and optimise the settings for quality. You'll need to adjust the settings depending on the laser and the power available. The material parameters for LaserPaper for JobControl can be downloaded from www.troteclaser.com.au


Step 3: Assembly

Take the blue engraved LaserPaper, fold along the scored edges, and glue the red LaserPaper to the center.


Why should I use Trotec LaserPaper?

Trotec LaserPaper offers a range of colours to suit certificates, thank you notes, invitations, cards and more. The Trotec range of laser engraving papers features a range is expert tested to ensure you get the best results.

Inspiration

Try different colours of LaserPaper to make your designs unique.



Check out the Trotec laser engraver series