Laser cutting moving windmill

Make a moving wind turbine model

Use TroGlass and TroCraft Eco wind turbine model

Request a demo

Laser cut your own model wind turbine  - complete with moving blades. This project is perfect for using up those  small pieces of TroCraft Eco and TroGlass you may have in the workshop. This project demonstrates the precision of the Trotec Laser and why it makes it the perfect choice for model makers worldwide.


Preparation

Machines Used:

Of course, you can also laser cut this wind turbine model with all other laser machines in the Speedy laser engraving series.

Tip:

  • Create a range of colourful wind turbine models by switching TroGlass black for any of the wide range of colours.

Step by Step

Step 1: Design

Open the template with your graphics editing program and edit to suit. Send the file to your laser with the following suggested parameters:

Process Mode Resolution Cut Line
Vector Job 1000dpi none
Halftone Others
Color Enhanced Geometries, Inner Geometries first

 

 


Step 2: Laser Process the TroCraft Eco (1mm)

Set up the laser with the honeycomb cutting table. Lay out the TroCraft Eco on the work area. Cover the rest of the working area to increase the vacuum. Please adjust the parameters to suit, depending on machine used and laser power.

Color Process Power output % Speed % ppi/Hz
Red CO2 cutting 66 2 1,000
Passes Air Assist Z offset Advanced
1 On 0mm -

Tip:

Use the small nose cone nozzle for the best cut quality when working with TroCraft Eco.


Step 3: Print the Wind Turbine to the Laser

Send the graphics for the turbine column to your laser machine with the following settings:

Process Mode Resolution Cut Line
Standard Job 333dpi None
Halftone Others
Color Enhanced Geometries

Step 4: Laser Process TroCraft Eco (3mm)

Lay the 3mm thick TroCraft Eco on the honeycombe cutting table in your laser, and cover the rest of the working area again. Then send the file to the laser with the following settings. The laser parameters may change depending on the machine used and the available laser power.

Laser parameters: Engraving

Color Process Power % Speed % ppi/Hz
Black Engrave CO2 15 50 500
Passes Air Assist Z offset Advanced
1 on 0mm High Quality

Laser parameters: Cutting

Color Process Power % Speed % ppi/Hz
Red CO2 cutting 100 0.8 1,000
Passes Air Assist Z-offset Advanced
1 On 0mm -

 

 


Step 5: Print the Stand to the Laser

Send the graphic for the stand made from TroGlass with the following settings to your Trotec Laser:

Process Mode Resolution Cut Line
Standard Job 500dpi None
Halftone Others
Color Enhanced Geometries, Inner Geometries first

Step 6: Laser process the TroGlass Black Satins

Switch the honeycomb cutting table with the acrylic cutting table. Place the TroGlass material in the laser.

Laser parameters: Engraving

Color Process Power % Speed % ppi/Hz
Black Engrave CO2 20 50 500
Passes Air Assist Z offset Advanced
1 On 0.5mm High Quality

Laser parameters: Cutting

Color Process Power % Speed % ppi/Hz
Red CO2 cutting 50 0.4 5,000
Passes Air Assist Z offset Advanced
1 On 0mm -

Tip:

Change the small nose cone for the larger nose cone for TroGlass.


Step 7: Assembly

Layout all four components ready for assembly.

Insert the wind turbine pillar into the base. Attach the blade to the nose, and fix in position with the TroGlass circle.

Use only gentle pressure ot attach the circle of TroGlass to ensure the blades can spin freely.

Enjoy your new wind turbine model - made with your Trotec Laser!


Inspiration

  • As an alternative to the "Don Quijote" wind turbine, you could also try a modern, three-bladed model.
  • Try a different color TroGlass for a more colourful look.
  • We recommend that you glue the circle of TroGlass.


Trotec Product Recommendations