Stamp or photo? Have a close look and discover filigree details of the stamp imprint on any kind of paper.
Preparation
Required material
laser rubber
stamp, we used Trodat Professional 5215
Trotec laser used
Speedy 100
60 watts
Tip:
Use a 1.5 inch or a 2.0 inch lens.
Step by Step
Engraving of the photo stamp with automatically generated cut lines
Step 1: Choose your photo
If possible, use a high-contrast portrait photo with a light, even background. If you want to use pictures from Internet, always download large-scale images.
Open the file "Photo stamp" and send it to the laser with the recommended laser parameters. The parameters might vary depending on the machine used and the available laser power.
Used engraving parameters (black):
Power 100 %, Speed 18 %, 600 ppi
Used cutting parameters (red):
Power 100 %, Speed 2,5 %, frequency 2000 Hz
Photo quality on white and noble high quality paper
Is it a photo or a stamp?
Step 3: Assembling of stamp and text plate
As soon as the rubber sheet is engraved and cut, you can assemble the two parts.
